Abstract:To improve densification of the (Ba0.85Ca0.15)(Hf0.1Ti0.9)O-3 (BCHT) ceramics prepared via powder injection moulding, MnO2 and Li2CO3 were used as sintering aids. The BCHT ceramics doped with different Mn- and Li-amount prepared by powder injection moulding in which paraffin was used as injection binder, have rather pure perovskite structure with complicated polymorphic ferroelectric phase coexistence. Polyhedral grains combined with nearly round shape grains with increased relative density and larger gains size were obtained at appropriate doping amount, related to the formation of liquid phase during sintering and increased mobility of ions due to the generation of point defects caused by heterovalent cations doping. The Mn- and Li-doped BCHT ceramics are displacement driven ferroelectrics with apparent diffused transition characteristic at different extent, relating to the morphotropic phase boundary composition and the variation of point defects induced by doping. Comparable or surpassing electrical performance was acquired, especially the dielectric breakdown strength was increased due to the improved sinterability. With appropriate doping amount, piezoelectricity larger than 300 pC/N can be obtained in the Mn- and Li-doped BCHT ceramics poled under low electric field.

Effect of Powder Embedded Sintering Technique on Properties of BaTiO3 Ceramics

The Effect of B2o3-Li2co3 Addition on Sintering Behavior and Dielectric Properties of Ba0.6sr0.4tio3 Ceramics

A simple approach to porous low-temperature-sintering BaTiO 3

Doping Effects In (Ba0.85ca0.15)(Hf0.1ti0.9)O-3 Lead-Free Piezoelectric Ceramics Prepared Via Powder Injection Moulding Using Simple Binder

Improved Energy Storage Performance of Ba0.4Sr0.6TiO3 Nanocrystalline Ceramics Prepared by Using Oxalate Co-Precipitation and Spark Plasma Sintering

Enhanced Dielectric Strength and Energy Storage Density in BaTi 0.7 Zr 0.3 O 3 Ceramics Via Spark Plasma Sintering

Sintering Behavior and Dielectric Property of BST-BSL Composite Ceramics

The Effect of Different Doping Methods of Sintering Aids on the Barium Titanate Based X7R Ceramics

Effect of sintering temperature on microstructure, dielectric and ferroelectric properties of BaTiO3 ceramics

Effect of sintering condition on microstructure and dielectric properties of BSTN composite ceramics

Sintering Behavior and Reliability Characteristics of Batio3-Based Ceramics Prepared by Different Methods

Influence of Sintering Temperature on Energy Storage Properties of BaTiO3–(Sr1−1.5Bi ) TiO3 Ceramics

Electric Properties of BaTiO3 Ceramics Sintered with the Hydrothermally Prepared Powers

Effect of two-step sintering on micro-honeycomb BaTiO3 ceramics prepared by freeze-casting process

Dielectric Properties of BaTiO3 Based Ceramics Prepared from Nano-powders

Study of sintering behavior and dielectric properties of phosphor-doped barium titanate

Study on Sintering Kinetic Curves of BaTiO3 Ceramics

Comparison of Characteristics of BaTiO<sub>3</sub> Prepared by Different Process

Effect of Process on the Dielectric Properties of BaTiO<sub>3</sub>-Based X9R Ceramics

Effect of Bi2O3-B2O3-CuO Additives on Dielectric Properties and Energy Storage of BaTiO3 Ceramics

Novel BaTiO3/PVDF Composites with Enhanced Electrical Properties Modified by Calcined BaTiO3 Ceramic Powders