Abstract:The resource tests of plain bearings with metal-polymer tribo-systems developed for the aviation industry are presented. The purpose of the work is to determine the wear resistance of modern anti-friction polymer materials in plain bearings in comparison with metal fluoroplastic tape. The uniqueness of the tests lies in the use of a combination of high-performance polymer materials in a pair with chromium and molybdenum coating during the reversible movements of plain bearings. Since the use of such bearings is mass in nature, the use of titanium materials in the manufacture of bearing cages will allow to significantly reduce the weight of the aircraft and increase its efficiency. It was determined that a plain bearing with a polymer material of carbon and polyamide fibers and PTFE with functional additives shows a wear resistance 1.8-2 times greater on the segment of 40-100 thousand cycles than bearings with other materials during laboratory resource tests. Also, industrial tests have established that after 2 million cycles, a hinged bearing with a metal-polymer tape shows a result that is 1.2-1.5 times lower in wear resistance than polymer materials, but all these results are within the tolerances of normal bearing operation. Industrial tests have proven that at replacing the inner ring of a plain sliding bearing with a titanium alloy with a molybdenum coating, the wear resistance is almost the same or slightly lower than when the polymer rubs against steel. Technological recommendations have been developed and a new design and materials of plain sliding bearings with polymer anti-friction coatings for the aviation industry have been proposed. The implementation of technological recommendations in the production of bearings will allow to move away from the universality of the use of plain bearings and extend their wear resistance and durability in general due to the use of the full thickness of the polymer material and the development of bearings with predicted characteristics for a specific task.

DEVELOPMENT OF EXPERIMENT SYSTEM FOR SELF-LUBRICATED PLASTIC PLAIN BEARINGS

Researches on Friction Performance of Water-Lubricated Polymer Composite Journal Bearings Based on Experiments

Experimental study on seismic performance of laminated rubber bearings with friction slipping

Experimental Study on Friction Characteristics of Water-lubricated Composite-material Bearings

Finite element simulation and experimental test of the wear behavior for self-lubricating spherical plain bearings

Development of the High-speed Sliding-rolling Contact Friction Testing Machine

Study on the tribological performance of self-lubricating thrust ball bearings with different embedded features

Experimental investigation on dry frictional behavior of the two self-lubricating composites under heavy loading conditions

Experimental Study on Material Properties of Bearing Bush of Water Lubricated Bearing

Experimental research on solid-lubrication journal bearing of unlubricated compressor

Resource testing of modified plain bearings for the aviation industry

Tribological and Vibration Properties of Three Different Polymer Materials for Water-Lubricated Bearings

DESIGN, DEVELOPMENT AND TESTING OF WATER-LUBRICATED CERAMIC JOURNAL BEARING

DEVELOPMENT OF DESIGN CRITERIA FOR A DRY FILM LUBRICATED BEARING SYSTEM

Experimental Investigation of Tribological Performance of Ptfe-Derived Solid Lubricants in Sliding Building Bearings

Tribological behavior of PTFE/Nomex/phenolic composite lubricant under cold forming condition in the bearing assembly process

Experimental Study on Friction Characteristics and Water Film Stiffness of Water Lubricated Rubber Bearings

The Effects of Mechanical Properties of Bearing Bush on Water Lubricated Plastic Bearing Lubricating Property

EXPERIMENTAL INVESTIGATION INTO THE LUBRICATION PERFORMANCE OF OIL-RING BEARINGS

Development and Application of PTFE Soft Belt Surface Welded Bearing

Design and Analysis of a Self-Lubricating Nuclear Joint Bearing above 320°C