Abstract:The fast-developing 5G communication is setting increasingly stringent requirements for on-chip voltage-controlled oscillators (VCOs). On the one hand, the VCOs need to generate an extreme pure spectrum to support complicated modulations, corresponding to a low phase noise (PN). On the other hand, a wider frequency tuning range (FTR) is preferred for various wideband applications. In addition, the flicker noise up-conversion has become a serious issue worsening PN at low offset frequencies, especially at advanced technology nodes. Practice has been made to improve the PN and FTR performance. The VCO in [1] covers a wide FTR of 80.6% through triple modes using standard V DD However, no harmonic shaping technique is used to improve PN, and it also suffers from the sacrificed tank's Q because of the asymmetry topology. In [2], the author uses circular topology inductors to obtain a high Q for a 22.4-to-26.8GHz VCO. A −138dBc/Hz low PN at 10MHz offset is achieved. However, the common-mode (CM) harmonic manipulation is absent, resulting in a 1.06MHz 1/f 3 corner frequency. Nevertheless, a tail-less NMOS-only structure may face reliability issues under standard V DD The VCO in [3] reaches low PN with low 1/f 3 corner frequencies using 2nd harmonic shaping while maintaining high-Q circular topology. However, the oscillator doesn't feature 3 rd harmonic shaping and multi-mode operation, covering only an FTR of 17.6%.

The Methods of Maintaining Low Frequency Stability in FBAR Based Cross-Coupled VCO Design.

A Low Phase Noise Fbar Based Multiband Vco Design

A 1.9ghz Low-Phase-Noise Complementary Cross-Coupled FBAR-VCO Without Additional Voltage Headroom in 0.18µm CMOS Technology.

A Bridged Contactless Measurement Technique for LC Tank Based Voltage-Controlled Oscillator.

A Low Phase Noise VCO with Placement Reordered Cores and High-Q Bond Wire Array Inductors

Design and Implementation of low phase noise oscillator based on film bulk acoustic resonator

A LOW POWER, LOW PHASE NOISE FBAR OSCILLATOR

A novel oscillator based on film bulk acoustic resonator

A 4.4-Ghz 193.2-Db FoM 8-Shaped-inductor Based LC-VCO Using Orthogonal-Coupled Triple-Coil Transformer

Laser Frequency Trimming Technology Based on FBAR

High coupling coefficient Temperature compensated FBAR resonator for oscillator application with wide pulling range

A broadband CMOS LC voltage-controlled oscillator for FMCW synthesizer

A Low Noise Self-Mixing-VCO Based on Coupled Class-F 2 Oscillators

A Low Noise Self-Mixing-VCO Based on Coupled Class-F<sub>2</sub> Oscillators

A Class-C Eight-Phase Voltage-Controlled Oscillator With 184.2 dBc/Hz FoM and Loop-Based Superharmonic Coupling in 65nm CMOS

An 8-12Ghz Class-F3 VCO with Multi-LC Tank in 28nm CMOS.

A 194.9dbc/hz FoM and 6.8-to-11.6ghz Quad-Core Dual-Mode Class-F VCO Featuring Wideband Flicker Noise Suppression

Class-C VCO with Amplitude Feedback Loop for Robust Start-Up and Enhanced Oscillation Swing

Suppression of Spurious Lateral Modes and Undesired Coupling Modes in Frame-Like FBARs by 2-D Theory

A 5.8 GHz Implicit Class-F VCO in 180-nm CMOS Technology

Design of low power and low phase noise LC-VCO for Bluetooth/WLAN applications