Abstract:Straw black liquor is relatively difficult to recover using the Tomlinson process because of the presence of silica in inorganic components. Gasification with direct causticization might serve as a promising alternative; however, the interaction between silica and direct causticization agents needs to be evaluated. In this work, desilication was achieved using a laboratory-scale membrane electrolysis cell adopted from the chlor-alkali industry. Then raw and desilicated straw black liquors were carried out through direct causticization with titanium dioxide (TiO2) and recycled sodium tri-titanate (Na2O·3TiO2) at 850°C using a tube furnace. The results show that these two agents exhibit different silica transfer mechanisms. When using TiO2, approximately 80% of the silica is retained in the solid residue after hydrolysis because of chemical interactions. Almost all of the silica transfers to the hydrolysis-derived white liquor when using Na2O·3TiO2. This means that the process of treating straw black liquor by direct causticization might need additional lime causticization to improve the efficiency of sodium recovery. This observation also indicates that silica will not consume the direct causticization agent Na2O·3TiO2 after the initial step using TiO2. The sodium hydroxide (NaOH) yield was 60% when using raw black liquor as the feed to the Na2O·3TiO2 recycling tests and 80% when using desilicated straw black liquor. Considering the NaOH recovered in the electrolysis cell, the total NaOH yields exceed 85% of total titratable alkali. No detectable deterioration of the direct causticization agents was found within the limited number of recycles tested. A greater number of cycles need to be tested at a larger scale to evaluate the feasibility of applying a direct causticization process to straw black liquor.

Direct Causticization between Recycled Titanates and Black Liquor

Kraft Black Liquor Steam Gasification with Direct Causticization

Effects of Titanium Dioxide As Direct Causticization Agent on the Pyrolysis and Steam Gasification Characteristics of Straw Black Liquor Solid

Characteristics of Direct Causticization between Titanium Dioxide and Sodium Carbonate

Effects of Silica on Chemical Recovery in the Direct Causticization of Wheat Straw Black Liquor

Hydrothermal Synthesis and Photocatalytic Property of CaTiO_3 Assisted with Sodium Citrate

Adjustment of Biomass Product Gas to Raise H2/CO Ratio and Remove Tar over Sodium Titanate Catalysts

Hydrothermal synthesis and photocatalytic property of CaTiO 3 assisted with sodium citrate

The Effect of Calcination Temperature on the Structure and Activity of TiO2/SiO2 Composite Catalysts Derived from Titanium Sulfate and Fly Ash Acid Sludge

Synthesis of na-doped lithium metatitanate and its absorption for carbon dioxide

A Novel Hybrid Iron-Calcium Catalyst/absorbent for Enhanced Hydrogen Production Via Catalytic Tar Reforming with In-Situ CO2 Capture

A novel preparation of titanium dioxide from titanium slag

Simultaneous removal of Cr(III) and V(V) and enhanced synthesis of high-grade rutile TiO2 based on sodium carbonate decomposition

Anti-caking in the production of titanium dioxide using low-grade titanium slag via the NaOH molten salt method

Development of CaO-based Sorbent Doped with Mineral Rejects–bauxite-Tailings in Cyclic CO2 Capture

Alkali fusion using sodium carbonate for extraction of vanadium and tungsten for the preparation of synthetic sodium titanate from spent SCR catalyst

Reduction of perovskite-geikielite by methane-hydrogen gas mixture: Thermodynamic analysis and experimental results

Recovery of Titanium Compounds from Ti-enriched Product of Alkali Melting Ti-bearing Blast Furnace Slag by Dilute Sulfuric Acid Leaching

Recovery of Nano-TiO 2 from Spent SCR Catalyst by Sulfuric Acid Dissolution and Direct Precipitation

Thermodynamics analysis and experiments on Ti-bearing blast furnace slag leaching enhanced by sulfuric acid roasting

Preparation of rutile titanium dioxide pigment from low-grade titanium slag pretreated by the NaOH molten salt method