Abstract:This study investigates the preparation of TiO2-SiO2-CaCO3 composite opacifier (Ti-Si-Ca) and its application in sanitary ceramic glazes. This approach involved hydrophobic agglomeration through surface-induced hydrophobic modification of TiO2, SiO2 and CaCO3 particles, along with the interactions between the hydrophobic carbon chains of modifiers. The Ti-Si-Ca formed a uniform coating with well-dispersed TiO2 and SiO2 particles on the CaCO3 surface and strong bonds formed among TiO2, SiO2 and CaCO3 through interpenetration of the organic carbon chains on the surface. The Ti-Si-Ca was added to the basic glazes of sanitary ceramics at a proportion of 15.5% and fired at 1125°C for 4 h. The resulting white ceramic glazes had chromaticity values of L*, a*, and b* at 93.76, -0.73, and 3.89, respectively, demonstrating superior glaze opacity and whiteness compared to glazes made with a ZrSiO4 opacifier (L* 90.30, b* 4.50). Glass and titanite phase make up the majority of the Ti-Si-Ca ceramic glazing layer of, with titanite serving as the opacified phase. Elimination of organic groups in Ti-Si-Ca during glaze firing formed interfacial chemical bonds among TiO2, SiO2 and CaCO3, which facilitated the synthesis of titanite from the three components at high temperatures. The Ti-Si-Ca was a highly opaque glaze without yellowing because the organic groups of Ti-Si-Ca were removed and interfacial chemical bonds formed among the TiO2, SiO2 and CaCO3 in the low-temperature stage of glaze firing. This transformed the three phases into titanite at high temperature and eliminated free TiO2. The formation of rutile TiO2, which has a yellow hue, at high temperatures was inhibited. This study provides a novel approach for low-energy preparation of TiO2-SiO2-CaCO3 composite opacifiers and addresses the challenge of replacing ZrSiO4 with TiO2 in ceramic opacifiers.

Characteristics of Direct Causticization between Titanium Dioxide and Sodium Carbonate

Improvement of Bioactivity of H(2)O(2)/TaCl(5)-treated Titanium after Subsequent Heat Treatments.

Bioactive treatment of titanium surface using a H2O2/HCl solution

Behavior of CaTiO3/Nano-CaO As a CO2 Reactive Adsorbent

Direct Causticization between Recycled Titanates and Black Liquor

Effect of Calcination Temperature on Crystal Structure and Photocatalytic Prop- Erty of TiO2/Diatomite Nanoparticles

The Effect of Calcination Temperature on the Structure and Activity of TiO2/SiO2 Composite Catalysts Derived from Titanium Sulfate and Fly Ash Acid Sludge

Hydrothermal Synthesis and Photocatalytic Property of CaTiO_3 Assisted with Sodium Citrate

Hydrothermal synthesis and photocatalytic property of CaTiO 3 assisted with sodium citrate

Interface Actions Between TiO2 and Porous Diatomite on the Structure and Photocatalytic Activity of TiO2-diatomite

Effects of Titanium Dioxide As Direct Causticization Agent on the Pyrolysis and Steam Gasification Characteristics of Straw Black Liquor Solid

Effect of SiO2/TiO2 ratio on the crystallization behavior of CaO-TiO2-SiO2 glass-ceramic system for opaque white glaze

Surface Chemical Modification of Nanosized Oxide Particles with A Titanate Coupling Reagent in Isopropanol

Preparation of TiO2-SiO2-CaCO3 Composite Opacifier by Hydrophobic Agglomeration and Mechanism of Inhibiting Glaze Yellowing

Synthesis of Titanium Dioxide Nanobelts

Effect of Calcination Temperature on Morphology and Photocatalytic Activity of Anatase TiO2 Nanosheets with Exposed {0 0 1} Facets

Preparation and characterization of titanium oxide nanotubes

A novel preparation of titanium dioxide from titanium slag

Investigation of Mesoporous and Microporous Nanocrystalline Silicon-Doped Titania

Effect of sulfate on crystal phase transition and crystal growth of titanium dioxide in metatitanic acid calcination

A zirconium-free glaze system for sanitary ceramics with SiO2-CaCO3-TiO2 composite opacifier containing anatase: Effect of interface combination among SiO2, CaCO3 and TiO2