Abstract:Effect of surfactant additives on nucleate pool boiling heat transfer of refrigerant-based nanofluid was investigated experimentally. Three types of surfactants including Sodium Dodecyl Sulfate (SDS), Cetyltrimethyl Ammonium Bromide (CTAB) and Sorbitan Monooleate (Span-80) were used in the experiments. The refrigerant-based nanofluid was formed from Cu nanoparticles and refrigerant R113. The test surface is horizontal with the average roughness of 1.6μm. Test conditions include a saturation pressure of 101.3kPa, heat fluxes from 10 to 80kWm−2, surfactant concentrations from 0 to 5000ppm (parts per million by weight), and nanoparticle concentrations from 0 to 1.0wt.%. The experimental results indicate that the presence of surfactant enhances the nucleate pool boiling heat transfer of refrigerant-based nanofluid on most conditions, but deteriorates the nucleate pool boiling heat transfer at high surfactant concentrations. The ratio of nucleate pool boiling heat transfer coefficient of refrigerant-based nanofluid with surfactant to that without surfactant (defined as surfactant enhancement ratio, SER) are in the ranges of 1.12–1.67, 0.94–1.39, and 0.85–1.29 for SDS, CTAB and Span-80, respectively, and the values of SER are in the order of SDS>CTAB>Span-80, which is opposite to the order of surfactant density values. The SER increases with the increase of surfactant concentration and then decreases, presenting the maximum values at 2000, 500 and 1000ppm for SDS, CTAB and Span-80, respectively. At a fixed surfactant concentration, the SER increases with the decrease of nanoparticle concentration. A nucleate pool boiling heat transfer correlation for refrigerant-based nanofluid with surfactant is proposed, and it agrees with 92% of the experimental data within a deviation of ±25%.

Heat Transfer Characteristics of Refrigerant-Based Nanofluid Flow Boiling Inside a Horizontal Smooth Tube

Heat Transfer Characteristics of Nanorefrigerant Flow Boiling Inside Tube

Measurement and Correlation of Frictional Pressure Drop of Refrigerant-Based Nanofluid Flow Boiling Inside a Horizontal Smooth Tube

Study on Flow Boiling Heat Transfer Characteristics of R161/oil Mixture Inside Horizontal Micro-Fin Tube

Effect of Nanoparticle Size on Nucleate Pool Boiling Heat Transfer of Refrigerant/oil Mixture with Nanoparticles

Flow and Heat Transfer Characteristics of Nanofluids Containing Rod-Like Particles in a Turbulent Pipe Flow

Property of Water-Nanoparticle Flow and Heat Transfer in the Double-Tube Heat Exchanger with Nanofluid

Numerical Research on Convective Heat Transfer and Resistance Characteristics of Turbulent Duct Flow Containing Nanorod-Based Nanofluids

Numerical Modeling of Turbulent Heat Transfer of a Nanofluid at Supercritical Pressure

Convective Heat Transfer and Resistance Characteristics of Nanofluids with Cylindrical Particles

Flow Boiling Heat Transfer; Experimental Study of Hydrocarbon Based Nanorefrigerant in a Vertical Tube

Flow Boiling Heat Transfer of Nano-Refrigerant TiO_2 and HFC134a Mixtures in a Horizontal Tube

The Characteristics and Correlation of Nanofluid Flow Boiling Critical Heat Flux

Influences of Refrigerant-Based Nanofluid Composition and Heating Condition on the Migration of Nanoparticles During Pool Boiling. Part I: Experimental Measurement

Convective heat transfer and flow characteristics of Cu-water nanofluid

Effect of surfactant additives on nucleate pool boiling heat transfer of refrigerant-based nanofluid

Flow and Heat Transfer Property of Oldroyd-B-Fluid-Based Nanofluids Containing Cylindrical Particles in a Pipe

Nano-Powders Migration and Heat Transfer Characteristics in Nanorefrigerant Boiling Process

Boiling Heat Transfer Correlations for Refrigerant Mixtures Flowing Inside Micro-Fin Tubes

Experimental study on cooling performance of nanofluid flow in a horizontal circular tube

Heat Transfer Of Falling Film Flowing Around A Horizontal Tube With Nanofluids