Abstract:The three-dimensional numerical simulation is conducted to study the impact of Al2O3/water nanofluid on the flow property and heat transfer of a counter flow double-tube heat exchanger where a laminar flow of cold water is in the outer tube, and in the inner tube there is a turbulent flow of hot nanofluid with particle volume concentrations ranging from 0.05% to 3%. The effects of temperature, flow rate, and particle volume concentration on the property of nanofluid flow and heat transfer are explored. The results show that the friction factor decreases with the increase of temperature and flow rate, and the pressure drop increases with increasing particle volume concentration. The temperature of the nanofluid at the outlet first decreases rapidly with time and then increases gradually to a stable value. Along the flow direction, the temperature of nanofluid decreases slowly at x/D < 10, and the axial temperature gradient increases at the full development stage. At a constant Reynolds number, the lower the temperature or the larger the particle volume concentration, the stronger the heat transfer. The local heat transfer coefficient on the wall of the inner tube decreases rapidly after reaching the peak x/D = 2.3, and then increases slowly until the outlet. The particle number density decreases sharply at x/D < 5, and then slowly decreases, while the change of the geometric mean diameter of particles is just the opposite. Increasing the flow rate or the temperature will strengthen particle coagulation, resulting in the decrease of particle number density and the increase of geometric mean diameter of particles.

Nano-Powders Migration and Heat Transfer Characteristics in Nanorefrigerant Boiling Process

Migration Characteristic of Spherical Nanoparticles from Liquid to Vapor Phase during Refrigerant/Nanolubricant Mixture Boiling

The Migration Characteristics of Nanoparticles in the Pool Boiling Process of Nanorefrigerant and Nanorefrigerant-Oil Mixture

Migration Performance of Nanoparticles in the Boiling Process of Nanorefrigerant

Migration mechanism of nanoparticles from liquid phase to vapor phase in the boiling of nanorefrigerant-oil mixture

Influences of refrigerant-based nanofluid composition and heating condition on the migration of nanoparticles during pool boiling. Part II: Model development and validation

Influences of Refrigerant-Based Nanofluid Composition and Heating Condition on the Migration of Nanoparticles During Pool Boiling. Part I: Experimental Measurement

Migration Mechanism of Carbon Nanotubes From Liquid Phase to Vapor Phase in the Boiling of Refrigerant/Nanolubricant Mixture

Migration of Carbon Nanotubes from Liquid Phase to Vapor Phase in the Refrigerant-Based Nanofluid Pool Boiling

Heat Transfer Characteristics of Refrigerant-Based Nanofluid Flow Boiling Inside a Horizontal Smooth Tube

A Theoretical Comparative Study on Nanorefrigerant Performance in A Single-Stage Vapor-Compression Refrigeration Cycle

Flow Boiling Heat Transfer; Experimental Study of Hydrocarbon Based Nanorefrigerant in a Vertical Tube

Research Progress of Boiling Heat Transfer of Nanofluids

Property of Water-Nanoparticle Flow and Heat Transfer in the Double-Tube Heat Exchanger with Nanofluid

Experimental and Model Research on Nanorefrigerant Thermal Conductivity

Numerical Research on Convective Heat Transfer and Resistance Characteristics of Turbulent Duct Flow Containing Nanorod-Based Nanofluids

Measurement and Correlation of Frictional Pressure Drop of Refrigerant-Based Nanofluid Flow Boiling Inside a Horizontal Smooth Tube

A review of nanorefrigerants: Flow characteristics and applications

Heat Transfer Characteristics of Nanorefrigerant Flow Boiling Inside Tube

Measurement of migrated mass of CuO nanoparticles in the boiling process of nanorefrigerant CuO-R113

Effect of Nanoparticle Size on Nucleate Pool Boiling Heat Transfer of Refrigerant/oil Mixture with Nanoparticles