Abstract:With the scaling up of ship in recent years, the explicit modeling of stiffened plates has made the numerical analysis time-consuming. The coordination of a massive number of elements may even bring the problem of convergence and stability, making the analysis unsolvable. The simplification of stiffened plate is particularly urgent in the nonlinear transient dynamic evaluation due to its small step time. Therefore, a simplified approach based on the stiffness equivalence for two-way stiffened plate is proposed. Firstly, based on the equilibrium and compatibility equations, the stiffened plate with orthotropic geometric properties is simplified as a single plate with orthotropic material properties. Then the load-deformation relationship of the single plate is developed by coupling the in-plane and out-of-plane stiffnesses. Subsequently, the simplified approach is used for the local hull structure to verify the applicability under static loading condition. Besides, a coupling model approach is proposed to avoid the local deformation error caused by the homogenization assumption. Afterwards, the modal analysis is conducted based on the simplified model of whole ship. Finally, the nonlinear transient dynamic evaluation of the whole ship model is performed under various collision conditions. For the modal analysis, the results of the homogenization model are accurate. But the simplification does not provide a significant improvement in computational efficiency. For the static and dynamic analysis, the responses of coupled model have good agreement with the detailed finite element model, while the computation time is significantly reduced. The simplified modeling approach can improve the computational efficiency, convergence and stability in the nonlinear transient dynamic evaluation of large ship.

A simplified analyzing method for overall longitudinal strength of pontoon during ship launching

Safety and stability analysis of the ship loader during shipping

Elastic calculation of ship end launching using ANSYS

Analysis of the Launching of Ships on Level Longitudinal Floating Dock

Computation of Longitudinal Lauching for a Multi-Purpose Cargo Ship

Structural analysis method of a pontoon-separated floating bridge connected by elastic hinges

Study on the Local Reinforcement of the Bilge Structure in Ship End Launching

Mechanical Analysis of Submarine Pipeline During Off-Bottom Towing Operation

Analysis on Buckling Performance of Submarine Pipelines During Deepwater Pipe-Laying Operation

A Simplified Progressive Collapse Analysis of Ultimate Longitudinal Strength of Ship Structures

Study on New Technology of End Launching of Ships with Slender Underwater Shape Using Pontoons

A direct calculation method for ship longitudinal launching curves

A structure-decomposition approach for dynamic analysis of sheet-pile groins subjected to tidal bores

Analysis of the overall structural strength and optimization recommendations for ultra-large container ships based on the improved equivalent design wave method

A simplified modeling and analysis approach for nonlinear transient dynamic evaluation of ship hull with single plate equivalence

Ultimate Longitudinal Strength of Composite Ship Hulls

An Investigation into the Optimal Weight Allocation of Ship End Launching

Numerical and Simplified Analytical Methods for Analysis of the Residual Strength of Ship Double Bottom

Analysis of effects of longitudinal partition bulkhead buckling on ship longitudinal strength

Simplified Calculation for Accumulated Combined Stress-Induced Damage to Hull During Overall Longitudinal Bending of Ship

Dynamic Analysis of Anti-Collision Pier on Elevated Piles with Large Lateral Displacement and Its New Energy-Control Based Design Method