Abstract:A low power and low phase noise phase-locked loop (PLL) design for low voltage (0.8 V) applications is presented. The voltage controlled oscillator (VCO) operates from a 0.5 V voltage supply, while the other blocks operate from a 0.8 V supply. A differential NMOS-only topology is adopted for the oscillator, a modified precharge topology is applied in the phase-frequency detector (PFD), and a new feedback structure is utilized in the charge pump (CP) for ultra-low voltage applications. The divider adopts the extended true single phase clock DFF in order to operate in the high frequency region and save circuit area and power. In addition, several novel design techniques, such as removing the tail current source, are demonstrated to cut down the phase noise. Implemented in the SMIC 0.13 mu m RF CMOS process and operated at 0.8 V supply voltage, the PLL measures a phase noise of -112.4 dBc/Hz at an offset frequency of 1 MHz from the carrier and a frequency range of 3.166-3.383 GHz. The improved PFD and the novel CP dissipate 0.39 mW power from a 0.8 V supply. The occupied chip area of the PFD and CP is 100 x 100 mu m(2). The chip occupies 0.63 mm(2), and draws less than 6.54 mW from a 0.8 V supply.

Ultra-low-power clock generation circuit for EPC standard UHF RFID transponders

Ultra low power oscillator for UHF RFID transponder

An ultra-low power passive UHF RFID transponder with self-calibrated clock generator

An ultra-low power passive UHF RFID tag with a CTS oscillator

A 0.8 V Low Power Low Phase-Noise Pll

A Low Voltage Low Power Oscillator Suitable for RFID Transponder

A Low Power Sub-GHz PLL with Optimized Class-C Voltage-controlled Oscillator

360Nw Self-Calibrated Clock Generator Operating from &#x2212;50&#x00b0;c to 120&Amp;#x00b0;c

Novel baseband processor for ultra-low-power passive UHF RFID transponder

Ultralow-voltage, low-power baseband processor for UHF RFID tags

An Ultra Low Power Digital Processor for Chinese UHF RFID Transponder

Power Management And Clock Generator For A Novel Passive Uwb Tag

A Low Voltage, Low Power RF/Analog Front-End Circuit for Passive UHF RFID Tags

An Ultra Low-Voltage, Low-Power Baseband-Processor for UHF RFID Tag

A Low-Power Dual-Clock Strategy for Digital Circuits of Epc Gen2 Rfid Tag

Design of a low-cost low-power baseband-processor for UHF RFID tag with asynchronous design technique

Low Power Design of UHF RFID Tag Baseband Processor

An UHF RFID Transponder with Novel Clock Generator and Demodulator

Clock Generator and OOK Modulator for RFID Application

A Subgigahertz UWB Transmitter With Wireless Clock Harvesting for RF-Powered Applications

A 0.5-V, 0.05-to-3.2ghz LC-Based Clock Generator for Substituting Ring Oscillators under Low-Voltage Condition