Abstract:The role of microstructure and doping on the mechanical strength of microscale tension specimens of columnar grain and laminated polysilicon doped with different concentrations of phosphorus was investigated. The average tensile strengths of undoped columnar and laminated polysilicon specimens were 1.3 ± 0.1 and 2.45 ± 0.3 GPa, respectively. Heavy doping reduced the strength of columnar polysilicon specimens to 0.9 ± 0.1 GPa. On grounds of Weibull statistics, the experimental results from specimens with gauge sections of 1000 $\mu \text{m}\times 100~\mu \text{m}\times 1~\mu \text{m}$ predicted quite well the tensile strength of specimens with gauge sections of 150 $\mu \text{m}\times 3.75~\mu \text{m}\times 1~\mu \text{m}$ , and vice versa. The large difference in the mechanical strength between columnar and laminated polysilicon specimens was due to sidewall flaws in columnar polysilicon, which were introduced during reactive ion etching (RIE) and were further exacerbated by phosphorus doping. Removal of the large defect regions at the sidewalls of columnar polysilicon specimens via ion milling increased their tensile strength by 70%–100%, approaching the strength of laminated polysilicon, which implies that the two types of polysilicon films have comparable tensile strength. Measurements of the effective mode I critical stress intensity factor, $K _{\mathbf {IC,eff}}$ , also showed that all types of polysilicon films had comparable resistance to fracture. Therefore, additional processing steps to eliminate the edge flaws in RIE patterned devices could result in significantly stronger microelectromechanical system components fabricated by conventional columnar polysilicon films. [2014-0269]

Gauge Factor And Nonlinearity Of P-Type Polysilicon Nanofilms

Influence of Doping Level on the Gauge Factor of Polysilicon Nano-Film

The Influence of Doping Concentration on Piezoresistive Temperature Characteristics of Polysilicon Nanofilms

Piezoresistive Properties of Heavily Doped P-type Polysilicon Films

Piezoresistive Linearity Analysis of Polysilicon Nanofilms Deposited at Different Temperatures Based on Interstitial-Vacancy Model

Tunnelling Piezoresistive Effect of Grain Boundary in Polysilicon Nano-Films

Analysis of Tunneling Piezoresistive Effect of P-Type Polysilicon Nanofilms

Response Linearity and Time Drift of Polysilicon Nanofilm Resistance for Piezoresistive Effect

Study On Polysilicon Resistivity Control With Nano-Scale Grain Size

A Tunneling Piezoresistive Model for Polysilicon

Temperature Characteristics of Polysilicon Piezoresistive Nanofilm Depending on Film Structure

The Influence of Thickness on Piezoresistive Temperature Properties of Polysilicon Nanofilms

Doping Effects in Co-deposited Mixed Phase Films of Hydrogenated Amorphous Silicon Containing Nanocrystalline Inclusions

Piezoresistive Sensitivity and Al Ohmic Contact of Highly Doped Polycrystalline Silicon Nano Thin Films

DC electrical trimming characteristics of polysilicon nanofilms with different doping concentrations

Role of Microstructure and Doping on the Mechanical Strength and Toughness of Polysilicon Thin Films

Variations of High-Pressure Thermoelectric and Mechanical Properties of Si Single Crystals under Doping with N and P–T Pre-Treatment

The influences of thickness on piezoresistive properties of poly-Si nanofilms

Polysilicon Nanofilm Pressure Sensor

Effects of Heavy Phosphorus-Doping on Mechanical Properties of Czochralski Silicon

Unexpected Phosphorus Doping Routine of Planar Silicon Nanowires for Integrating CMOS Logics.