Abstract:The phase separation of diglycidyl ether of bisphenol A/methyl tetrahydrophthalic anhydride blends modified with three poly(ether imide)s (PEIs) of different molecular weights was investigated with scanning electron microscopy (SEM) and time-resolved light scattering (TRLS). The morphologies observed by SEM for the three blends were all close to a cocontinuous structure with different periodic distances. The results of TRLS indicated that the phase separation for the PEI-modified epoxy blends took place according to the spinodal decomposition mechanism and the onset time of phase separation, with the periodicity of the phase structure depending on the PEI molecular weight and cure temperature. The time-dependent peak scattering vector was simulated with a Maxwell-type viscoelastic relaxation equation, indicating that the coarsening process of epoxy droplets was mainly controlled by the viscoelastic flow. Relaxation times obtained at different temperatures for the three blends could be described by the Williams-Landel-Ferry equation. The effects of the PEI molecular weight on the processes of viscoelastic phase separation were investigated, and the observed trends could be explained qualitatively through thermodynamic analysis. (C) 2009 Wiley Periodicals, Inc. J Appl Polym Sci 114: 3158-3167, 2009

Studies on the Phase Separation of Polyetherimide Modified Tetrafunctional Epoxy Resin. Ii. Effects of the Molecular Weight

Studies on the Phase Separation of Poly(Ether Imide)‐Modified Cyanate Ester Resin

Effect Of Polyethersulfone On The Mechanical And Rheological Properties Of Polyetherimide-Modified Epoxy Systems

Polymerization Induced Phase Separation in Poly(ether Imide)-Modified Epoxy Resin Cured with Imidazole

Studies on the Phase Separation of Polyetherimide‐modified Epoxy Resin, 2. Effect of Molecular Weight of PEI on the Structure Formation

Rheological Study of Epoxy Systems Blended with Poly(ether sulfone) of Different Molecular Weights

Viscoelastic Effects on the Phase Separation in Thermoplastics-Modified Epoxy Resin

Studies on the Phase Separation of Poly(ether Imide)modified Tetrafunctional Epoxy Resin——The Effect of Curing Agent Ratio

Viscoelastic Effects on the Phase Separation in Thermoplastics Modified Cyanate Ester Resin

Polymerization-induced phase separation in polyethersulfone modified epoxy resin systems: effect of curing reaction mechanism

Effects of the Molecular Weight of Poly(ether Imide) on the Viscoelastic Phase Separation of Poly(ether Imide)/epoxy Blends

Rheological Behaviors and Structural Transitions in A Polyethersulfone-Modified Epoxy System During Phase Separation

Kinetics of Phase Separation at the Early Stage of Spinodal Decomposition in Epoxy Resin Modified with PEI Blends

Polymerization-induced viscoelastic phase separation in polyethersulfone-modified epoxy systems.

Studies on the phase separation of polyetherimide-modified epoxy resin, 3 - Part 1 - Morphology development of the blend during curing

Morphology Evolution During the Phase Separation of Polyetherimide/Epoxy Blends

Morphology and mechanical properties of poly(ether-imide)-modified polycyanurates

Studies on the phase separation of polyetherimide-modified epoxy resin, 1. Effect of curing rate on the phase structure

Studies on the Phase Separation of Polyetherimide-Modified Epoxy Resin, 3. Morphology Development of the Blend During Curing

Study on the Polyethersulfone/bismaleimide Blends: Morphology and Rheology During Isothermal Curing

Effect of Molecular Weight on Reaction-Induced Phase Separation of Epoxy Resin Modified with Fluorocarbon Chain Terminated Polyetherimide