Abstract:The phase transformations occurring in a 0.45 wt.% C plain steel subjected to plasma nitriding at 540–560 °C for 5.5 h, followed by a salt bath thermoreactive deposition and diffusion (TRD) chromizing process at 500 °C or 550 °C (a process referred to as low-temperature chromizing or duplex chromizing) was investigated by means of optical microscopy(OM), scanning electron microscopy(SEM), X-ray energy dispersive spectroscopy(EDS), and X-ray diffraction. It was found that a CrN compound layer with an average thickness of 7.4 μm and an average micro-hardness of 1476 HV0.01 was formed in the prior plasma nitrided compound layer by low-temperature chromizing at 550 °C for 6 h. The chromized coating as a whole was found consisting of three sub-layers, namely the outer CrN layer, the intermediate diffusional layer, and the inner residual nitrided compound layer, all formed in the prior nitrided compound layer, and with the inner sub-layer vanishing by prolonging the chromizing time. The intermediate diffusional layer formed at the initial stages of TRD was seen “black” under OM (hence is called “black zone”), and found consisting of α-Fe as a major phase. The self-exhaustion of the “black zone” promoted the chromium atom diffusion deeper into the substrates. The transformation paths involved in the decomposition of the prior nitrided compound layer was likely to be ε-Fe2–3N→γ′-Fe4N→α-Fe; and the high hardness of the chromized coating was attributed to a large amount of nano-sized and evenly distributed CrN grains generated in the compound layer.

Formation of Nanostructured Cr2N/CrN Layer on Plain 20 Carbon Steel by Duplex Chromizing Process

Formation of nanostructured Cr2N/CrN layer on plain 20 carbon steelby duplex chromizing process

Formation of A Nanostructured Crn Layer on Nitrided Tool Steel by Low-Temperature Chromizing

Phase transformations in low-temperature chromized 0.45 wt.% C plain carbon steel

Microstructure, Adhesion and Tribological Properties of CrN/CrTiAlSiN/WCrTiAlN Multilayer Coatings Deposited on Nitrocarburized AISI 4140 Steel

Formation of Chromium Nitride Coatings on Carbon Steels by Pack Cementation Process

Microstructure, Mechanical and Adhesive Properties of CrN/CrTiAlSiN/WCrTiAlN Multilayer Coatings Deposited on Nitrided AISI 4140 Steel

A Novel Duplex Low-temperature Chromizing Process at 500Oc

Study on Complex Chromizing at 550℃ for H13 Steel

Diamond-like Carbon Film on 20 CrNiMo Steel Prepared by Hollow-Cathode Glow Discharge

Nitrogen diffusion mechanism, microstructure and mechanical properties of thick Cr/CrN multilayer prepared by arc deposition system

Microstructure Characteristics and Formation Mechanism of Co-Deposition Coating on Plain 45# Carbon Steel via Simultaneous Chro-mising and Nitriding by Pack Cementation Process

A Novel Single-Step Surface-Treatment Process for Forming Cr-Nitride Coatings on Steels

Structural, Mechanical and Tribocorrosion Behaviour in Artificial Seawater of CrN/AlN Nano-Multilayer Coatings on F690 Steel Substrates

Duplex surface treatment of steels by nitriding and chromizing

Mechanical and High-Temperature Tribological Properties of Cr3C2-NiCr/TiN Duplex Coating

Preparation and electrochemical properties of gradient CrNx coatings on H13 steel

Study on the Properties of Cr/CrxN Films Prepared by Magnetron Sputtering and Ion Implantation Alternately

Microstructure and Tribological Properties of Multilayered ZrCrW(C)N Coatings Fabricated by Cathodic Vacuum-Arc Deposition

Microstructure evolution and mechanical performance of Cr-N/Al-Cr multilayer coatings produced by plasma nitriding Cr-coated Al alloy

Microstructure and Mechanical Properties of Thick Cr/CrN Multilayer Coatings by Multi-arc Ion Plating