Abstract:The study focuses on the development of polyoxymethylene (POM)/poly(lactic acid) (PLA) blends with increased impact and thermal resistance. The study was conducted in two phases; in the first part, a series of unmodified blends with PLA content of 25, 50, and 75 wt.% was prepared, while the second part focused on the modification of the PLA/POM (50/50) blends. An ethylene/butyl acrylate/glycidyl methacrylate terpolymer (E/BA/GMA) elastomer (EBA) was used to improve the impact strength of the prepared blends, while reactive blending was used to improve interfacial interactions. We used a multifunctional epoxy chain extender (CE) as the compatibilizer. Static tensile tests and notched Izod measurement were used to evaluate the mechanical performance of the prepared samples. The thermomechanical properties were investigated using dynamic mechanical thermal analysis (DMTA) analysis and heat deflection temperature (HDT)/Vicat softening temperature (VST) methods. The crystallinity was measured using differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXS) measurements, while the rheology was evaluated using a rotational rheometer. The paper also includes a structure analysis performed using the SEM method. The structural tests show partial miscibility of the POM/PLA systems, resulting in the perfect compatibility of both phases. The impact properties of the final blends modified by the EBA/CE system were found to be similar to pure POM resin, while the E modulus was visibly improved. Favorable changes were also noticeable in the case of the thermomechanical properties. The results of most of the conducted measurements and microscopic observations confirm the high efficiency of the reaction for PLA as well as for the modified POM/PLA mixtures.

Acrylate Elastomer Toughened and Uv Stabilized Polyoxymethylene

Effect of Acrylate Elastomer on the Aging-Resistance of POM

Research on Toughening Modification of Copolymerized Polypropylene Using Polyolefin Elastomers

Polyoxymethylene/thermoplastic polyamide elastomer blends: Morphology, crystallization, mechanical, and antistatic properties

Investigation on the mechanical, thermal and electrical properties of polyoxymethylene composites modified by thermoplastic polyurethane elastomer and carbon fiber

Preparation of Poly(Phenylene Oxide)/Polyamide-6 Nanocomposites with High Tensile Strength and Excellent Impact Performance

Toward Supertough and Heat-Resistant Binary Blend: Polyoxymethylene/elastomer Via In-Situ Graft Copolymer Formation During One-Pot Reactive Melt Blending

Synthesis and Characterization of HALS/UV-absorbers Bifunctionalized Core-Shell Elastomer and Its Application in Polyoxymethylene

Phase Morphology and Mechanical Properties of the Electrospun Polyoxymethylene/polyurethane Blend Fiber Mats

Influence of Polyacrylates/TiO_2 Composite Particles on the Microstructure and Properties of POM

Characterizations and Properties of POM Toughened by Thermoplastic Polyamide Elastomer

Study on POM Modification by Thermoplastic Polyurethane Elastomer

Effect of Light-shield Agents on the Structural and Properties of Ageing POM

Study on the High Efficiency Antioxidant of Polyoxymethylene

Toughening Mechanism In Polyoxymethlene/Thermoplastic Polyurethane Blends

Improving the Toughness and Thermal Resistance of Polyoxymethylene/Poly(lactic acid) Blends: Evaluation of Structure-Properties Correlation for Reactive Processing

Toughening mechanism in polyoxymethylene/thermoplastic polyurethane blends

Crystallization behavior and toughening mechanism of poly(ethylene oxide) in polyoxymethylene/poly(ethylene oxide) crystalline/crystalline blends

Influence of acrylonitrile styrene copolymer on the thermal stability of polyoxymethylene resin

The mechanical properties, compatibility, and thermal stabilities of poe-graft-methyl methacrylate and acrylonitrile(POE-g-MAN)/ styrene- acrylonitrile copolymer (SAN Resin) blends

Preparation and Property of TPEE Polyester Elastomer Toughened Modified Copolyformaldehyde