Abstract:Highly ordered and vertically oriented TiO2 nanotube (NT) arrays were synthesized with potentiostatic anodization of Ti foil and applied to fabricate gel-state dye-sensitized solar cells (DSSCs). The open structure of the TiO2 NT facilitates the infiltration of the gel-state electrolyte; their one-dimensional structural feature provides effective charge transport. TiO2 NTs of length L=15-35 μm were produced on anodization for periods of t=5-15 h at a constant voltage of 60 V, and sensitized with N719 for photovoltaic characterization. A commercially available copolymer, poly(methyl methacrylate-co-ethyl acrylate) (PMMA-EA), served as a gelling agent to prepare a polymer-gel electrolyte (PGE) for DSSC applications. The PGE as prepared exhibited a maximum conductivity of 4.58 mS cm(-1) with PMMA-EA (7 wt %). The phase transition temperature (Tp) of the PGE containing PMMA-EA at varied concentrations was determined on the basis of the viscosities measured at varied temperatures. Tp increased with increasing concentration of PMMA-EA. An NT-DSSC with L=30 μm assembled using a PGE containing PMMA-EA (7 wt %) exhibited an overall power conversion efficiency (PCE) of 6.9%, which is comparable with that of a corresponding liquid-type device, PCE=7.1%. Moreover, the gel-state NT-DSSC exhibited excellent thermal and light-soaking enduring stability: the best device retained ∼90% of its initial efficiency after 1000 h under 1 sun of illumination at 50 °C, whereas its liquid-state counterpart decayed appreciably after light soaking for 500 h.

Solid-State Dye-Sensitized Solar Cells Using Tio2 Nanotube Arrays on Fto Glass

Ordered TiO2 Nanotube Arrays on Transparent Conductive Oxide for Dye-Sensitized Solar Cells

High-Performance and Stable Gel-State Dye-Sensitized Solar Cells Using Anodic TiO2 Nanotube Arrays and Polymer-Based Gel Electrolytes

High-efficiency Solid-State Dye-Sensitized Solar Cells: Fast Charge Extraction Through Self-Assembled 3D Fibrous Network of Crystalline TiO2 Nanowires.

High-Efficiency Solid-State Dye-Sensitized Solar Cells Based on Tio2-Coated Zno Nanowire Arrays

Large diameter TiO$_2$ nanotubes enable integration of conformed hierarchical and blocking layers for enhanced dye-sensitized solar cell efficiency

Hybrid TiO2–SnO2 Nanotube Arrays for Dye-Sensitized Solar Cells

Flexible Fiber-Type Dye-Sensitized Solar Cells Based on Highly Ordered TiO2 Nanotube Arrays

Highly-Ordered Tio2 Nanotube Arrays with Double-Walled and Bamboo-Type Structures in Dye-Sensitized Solar Cells

Fabrication of TiO 2 nanorod array/semiconductor nanocrystal hybrid structure for photovoltaic applications

ZnO nanotube-based dye-sensitized solar cell and its application in self-powered devices.

TiO2 nanotube based dye-sensitized photoanode

Open-circuit voltage improvement by using TiO2 nanotubes as a working electrode of dye-sensitized solar cell

Large-scale, noncurling, and free-standing crystallized TiO2 nanotube arrays for dye-sensitized solar cells

Highly ordered hierarchical TiO2 nanotube arrays for flexible fiber-type dye-sensitized solar cells

Fiber-shaped all-solid state dye sensitized solar cell with remarkably enhanced performance via substrate surface engineering and TiO2 film modification

A Solid-State Dye-Sensitized Solar Cell Based On A Novel Ionic Liquid Gel And Zno Nanoparticles On A Flexible Polymer Substrate

Efficient Organic-Dye-Sensitized Nanocrystalline Tio2 Solar Cells

Enhanced Performance of Dye-Sensitized Solar Cells based on TiO2 Nanotube Membranes using Optimized Annealing Profile

Fabrication of Highly-Oriented TiO2 Nanotube Arrays and Its Application in Dye-Sensitized Solar Cells

Fabrication of Morphology Controllable Rutile TiO2 Nanowire Arrays by Solvothermal Route for Dye-Sensitized Solar Cells