Abstract:In this study, a novel sol-gel method is used to synthesize amorphous silica-alumina materials with a narrow mesoporous distribution and various Si/Al molar ratios without using any templates and pore-regulating agents. During the preparation procedure, only inexpensive inorganic salts were used as raw materials, instead of expensive and harmful alkoxides. The precursor sol was dried at room temperature in a vacuum box kept at 60 mmHg until it began to form the gel. The results of a nitrogen sorption experiment indicate that the synthesized materials with different Si/Al molar ratios have similar mesoporous distributions (within 2-12 nm). Moreover, it was found that the material's pore size distribution remains at a similar value during the heat treatment from room temperature to 550 degreesC. On the basis of the nitrogen sorption, TEM, and AFM characterization results, a formation mechanism of mesopores which accounts for the experimental data is also suggested. This suggested mechanism involves rearrangement of the primary particles during the drying process to form the precursors of the similarly sized mesopores. The synthesized materials were characterized by XRD, thermal analysis (TG/DTA), Al-27 and Si-29 MAS NMR spectroscopy, SEM, TEM, and AFM. The results of Al-27 and 29Si MAS NMR indicate that the distribution of silicon and aluminum in the synthesized materials is more uniform and homogeneous than that in the mixed oxides prepared via the traditional sol-gel method even at high alumina contents. The type and density of the acid sites were studied using pyridine adsorption-desorption FTIR spectroscopy. It was shown that the acidity of the synthesized materials is higher than that of the silica-alumina materials prepared by conventional methods.

Synthesis of Nanostructural Silica Using Quaternary Ammonium Salt of Lignin as Template

Synthesis and formation mechanism of amorphous silica particles via sol–gel process with tetraethylorthosilicate

Synthesis of Silica Nanocubes by Sol–gel Method

Preparation of Helical Nanostructured Silica Using Gelator and Surfactant as Template

Sol-Gel Synthesis of Nano-Sized Silica-Alumina Mesoporous Molecular Sieves with Bimodal Pore Structure

Preparation of Silica Nanosprings Using Cationic Gelators As Template

Fabrication of Silica Nanoparticles and Hollow Spheres Using Ionic Liquid Microemulsion Droplets As Templates

Synthesis of Mesoporous Silica Using Triton X - 100 As Template and Study of the Morphology

Synthesis of rod-like mesoporous silica using mixed surfactants of cetyltrimethylammonium bromide and cetyltrimethylammonium chloride as templates

Regulation of Silica Nanotube Diameters: Sol−Gel Transcription Using Solvent-Sensitive Morphological Change of Peptidic Lipid Nanotubes As Templates

Synthesis of Mesoporous Silica Using Anionic Surfactant/Cationic Polyamine As A Template

A Novel Method To Synthesize Amorphous Silica−Alumina Materials with Mesoporous Distribution without Using Templates and Pore-Regulating Agents

Synthesis of mesoporous silica using urea–formaldehyde resin as an active template

Synthesis of mesoporous silica using CO2/N2switchable surfactant as soft templates

Preparation ofporous silicon oxide materials by lignin trimethyl quaternary ammonium salt as templates.

Synthesis of Amorphous, Microporous Silica with Adamantanamine As A Templating Agent

Preparation of hollow silica spheres with different mesostructures

A novel approach for the synthesis of monodispersed porous silica microspheres with high surface area

Synthesis and Characterization of Ordered Mesoporous Silica via STAB as Template

Synthesis of radial silicas: A dynamic templating approach

Structural Regulation of Lignin/silica Nanocomposites by Altering the Content of Quaternary Ammonium Groups Grafted into Softwood Kraft Lignin