Abstract:In this study, a novel sol-gel method is used to synthesize amorphous silica-alumina materials with a narrow mesoporous distribution and various Si/Al molar ratios without using any templates and pore-regulating agents. During the preparation procedure, only inexpensive inorganic salts were used as raw materials, instead of expensive and harmful alkoxides. The precursor sol was dried at room temperature in a vacuum box kept at 60 mmHg until it began to form the gel. The results of a nitrogen sorption experiment indicate that the synthesized materials with different Si/Al molar ratios have similar mesoporous distributions (within 2-12 nm). Moreover, it was found that the material's pore size distribution remains at a similar value during the heat treatment from room temperature to 550 degreesC. On the basis of the nitrogen sorption, TEM, and AFM characterization results, a formation mechanism of mesopores which accounts for the experimental data is also suggested. This suggested mechanism involves rearrangement of the primary particles during the drying process to form the precursors of the similarly sized mesopores. The synthesized materials were characterized by XRD, thermal analysis (TG/DTA), Al-27 and Si-29 MAS NMR spectroscopy, SEM, TEM, and AFM. The results of Al-27 and 29Si MAS NMR indicate that the distribution of silicon and aluminum in the synthesized materials is more uniform and homogeneous than that in the mixed oxides prepared via the traditional sol-gel method even at high alumina contents. The type and density of the acid sites were studied using pyridine adsorption-desorption FTIR spectroscopy. It was shown that the acidity of the synthesized materials is higher than that of the silica-alumina materials prepared by conventional methods.

Synthesis of mesoporous silica using urea–formaldehyde resin as an active template

Behavior of epoxy resin filled with nano-SiO<sub>2</sub> treated with a Eugenol epoxy silane

Synthesis of Mesoporous Silica Materials via Nonsurfactant Urea-Templated Sol-Gel Reactions

Synthesis of Mesoporous Carbon/Silica Using the Oligomer of Urea-formaldehyde Resin As Carbon Source and the Influence of Carbonization Temperature

Synthesis of porous silica gel and study on the adsorption of cerium

Synthesis of mesoporous silica hollow spheres in supercritical CO2/water systems

Mesoporous silica obtained with methyltriethoxysilane as co-precursor in alkaline medium

Facile Synthesis Of Monodisperse Microspheres And Gigantic Hollow Shells Of Mesoporous Silica In Mixed Water-Ethanol Solvents

Triconstituent Co-Assembly to Ordered Mesostructured Polymer-Silica and Carbon-Silica Nanocomposites and Large-Pore Mesoporous Carbons with High Surface Areas.

Organosilane-assisted Synthesis of Ordered Mesoporous Poly(furfuryl Alcohol) Composites

One-pot synthesis of two different highly porous silica materials

Preparation of Epoxy Resin/Silica Hybrid Composites for Epoxy Molding Compounds

Synthesis of Composite Nanoparticles Bearing Epoxy Functional Groups: Encapsulation of Silica by Emulsion Polymerization of Gma

Mesoporous Structure Control of Silica in Room-Temperature Synthesis under Basic Conditions

A Systematic Investigation Of The Formation Of Ordered Mesoporous Silicas Using Poly(Ethylene Oxide)-B-Poly(Methyl Methacrylate) As The Template

Tunable Hierarchical Porous Silica Materials Using Hydrothermal Sedimentation-Aggregation Technique

Synthesis and Characterization of Three-Dimensionally Ordered Macroporous Silica

Synthesis of mesoporous silica using block copolymer-cationic surfactant mixtures as templates

Cosolvent-free sol–gel synthesis of macroporous silica gels from tetramethoxysilane–tetraethoxysilane mixtures

A Novel Method To Synthesize Amorphous Silica−Alumina Materials with Mesoporous Distribution without Using Templates and Pore-Regulating Agents

Design and Synthesis of Ordered Mesoporous Silica Materials with High Degree of Silica Condensation at High Temperature from a Mixture of Polymer Surfactant with Small Organic Ammonium.