Abstract:By simple impregnation and hydrothermal treatment, MgO supported iron catalysts were obtained and used for carbon nanotube (CNT) growth from chemical vapor deposition with methane as the carbon source. Single/double/multi-walled CNTs (S/D/MWCNTs) were selectively synthesized on the Fe/MgO catalyst with different iron loadings. When the iron loading was low (0.5%), the iron atom distributed on the MgO support was sintered to iron nanoparticles with a size of 0.8–1.2 nm under the growth conditions. This catalyst promoted the formation of SWCNTs, which was attributed to the surface diffusion of carbon atoms on it. The selectivity for SWCNTs in the as-grown product from the 0.5%Fe/MgO catalyst was 90%, and the carbon mass yield was 19 times that of the active phase. When the iron loading was increased to 3%, larger iron catalyst particles of about 2.0 nm were formed. On this catalyst, there was more bulk diffusion of carbon, and DWCNTs became the main products due to the combination of both surface and bulk diffusion. With the iron loading was further increasing, iron particles from 1 to 8 nm were formed, which promoted the growth of MWCNTs together with S/DWCNTs. With increasing iron amount on the porous MgO support, the diameter, wall number, and proportion of semiconducting CNTs also increased. This provides a controllable way to selectively grow S/D/MWCNTs on a large scale in a fluidized bed to meet critical needs for CNTs in applications.

Rapid Synthesis of Fe/SiO2 Catalysts and Growth of Carbon Nanotubes by Chemical Vapor Deposition

Influence of Mesoporous Materials on the Preparation of Carbon Nanotubes

Narrow-chirality distributed single-walled carbon nanotube synthesized from oxide promoted Fe–SiC catalyst

Preparation of Carbon Nanotubes at the Surface of Fe/SBA-15 Mesoporous Molecular Sieve

Growth of Carbon Nanotubes with Metal-Loading Mesoporous Molecular Sieves Catalysts

Synthesis of Carbon Nanotubes by Decomposing Alcohol

Catalysts effect on morphology of carbon nanotubes prepared by catalytic chemical vapor deposition in a nano-agglomerate bed

Growth of multi-walled carbon nanotubes on Si substrate with Fe3O4/DR film as catalyst precursors

Synthesis of carbon nanotubes filled with Fe3C nanowires by CVD with titanate modified palygorskite as catalyst

Carburization of Fe/Ni Catalyst for Efficient Growth of Single-Walled Carbon Nanotubes

Synthesis and growth of multi-walled carbon nanotubes (MWNTs) by CCVD using Fe-supported zeolite templates

Synthesis and Growth Mechanism of Fe-Catalyzed Carbon Nanotubes by Plasma-Enhanced Chemical Vapor Deposition

Selective Synthesis of Single/Double/Multi-walled Carbon Nanotubes on MgO-Supported Fe Catalyst

In situ growth of CNTs on carbon fiber by chemical vapor deposition

Catalyst Design Using Nanoporous Iron for the Chemical Vapor Deposition Synthesis of Single-Walled Carbon Nanotubes

Carbon Nanotube Synthesis and Parametric Study Using CaCO3 Nanocrystals As Catalyst Support by CVD

Controlled Growth of Fe Catalyst Film for Synthesis of Vertically Aligned Carbon Nanotubes by Glancing Angle Deposition

SiO2-promoted growth of single-walled carbon nanotubes on an alumina supported catalyst

Preparation of High Purity Carbon Nano -Tubes from Ethylene Decomposition over Nanosized Iron- Based Catalysts

Growth of Straight Carbon Nanotubes by Simple Thermal Chemical Vapor Deposition

Interaction-mediated growth of carbon nanotubes on acicular silica-coated α-Fe catalyst by chemical vapor deposition