Abstract:Recent decades have seen a growing concern about ever-increasing green house gas (GHG) emissions and depletion of fossil fuels. Polygeneration, a multi-input multi-output energy system, provides huge opportunities to tackle these problems due to its superior performances over conventional energy systems in terms of energy conversion efficiency and GHG emissions. Many approaches have been made in process design and analysis of polygeneration energy systems, but most of them focus on using coal gasification as the only way to provide gas for downstream utilization. Coke oven gas, another gas source with huge capacity, however, has not received enough attention in polygeneration process design, and researches in this field are still rather limited. In this paper, we present a dual-gas sourced polygeneration process design which uses both gasification gas and coke oven gas and produces methanol, dimethyl ether (DME), and dimethyl carbonate (DMC) in an integrated catalysis procedure. Gasification gas and coke oven gas are converted to synthesis gas, or syngas, via a catalytic reforming procedure, where the ratio between carbon monoxide and hydrogen in the syngas is carefully adjusted according to specific requirements of downstream chemical synthesis reactions. An integrated catalysis procedure follows, where DME is synthesized from the fresh syngas first, unconverted syngas is then sent to a methanol synthesis unit to produce methanol, and part of the methanol is further converted to DMC in a DMC synthesis unit. Based on the proposed process design, an exergoeconomic analysis and an exergy cost distribution diagram are presented, from which the production cost of a product over each functional block of the process can be easily obtained. Analysis results show that the largest exergy loss occurs in an exothermic reformer, accounting 60.4 percent of the total exergy loss. The exergy cost distribution diagram indicates that DMC has the highest exergy cost, followed by DME and methanol, and it is economically favorable to use the exhaust gas from the chemical synthesis block for power generation.

Process Simulation of Single-Step Dimethyl Ether Production Via Biomass Gasification.

Process design and downstream optimization of the direct synthesis route for cleaner production of dimethyl ether from biogas

Process Simulation and Environmental Aspects of Dimethyl Ether Production from Digestate-Derived Syngas

Thermodynamic Simulation of Direct DME Synthesis via Biomass Gasification

Simulation-Based Multiobjective Optimization Of The Product Separation Process Within An Mtp Plant

Process Simulation, Thermodynamic and System Optimization for the Low-Carbon Alcohols Production Via Gasification of Second-Generation Biomass

Gasoline Synthesis from Biomass-Derived Syngas Comparing Different Methanol and Dimethyl Ether Pathways by Process Simulation, Based on the Bioliq Process

Experimental study for dimethyl ether production from biomass gasification and simulation on dimethyl ether production

One-step Synthesis of Dimethyl Ether from Semi-water Gas for Industrial Trial Production

Simulation and exergoeconomic analysis of a dual-gas sourced polygeneration process with integrated methanol/DME/DMC catalytic synthesis

Integrated Energy-Exergy-Based Evaluation and Optimization of A Bio-Dimethyl Ether Production System Via Entrained Flow Gasification

Synthetic fuels and chemicals production from biomass synthesis gas

Design and analysis of a new DME production process with power cogeneration

Numerical simulation analysis of biomass gasification and rich-H2 production process in a downdraft gasifier

Thermodynamic Optimization of Dimethyl Ether Synthesis from Syngas in Polygeneration Systems

One-step synthesis of dimethyl ether from biomass-derived syngas on CuO-ZnO-Al2O3/HZSM-5 hybrid catalyst: Combination method, synergistic effect, water-gas shift reaction and catalytic performance

Thermodynamics of the Single-Step Synthesis of Dimethyl Ether from Syngas

Study on synthesis of dimethyl ether from syngas obtained by biomass gasification

Thermodynamic simulation of methanol synthesis from biomass-derived syngas

Analysis of Process Control Performance for an Industrial Demethanizer Based on Dynamic Simulation

A dual-gas sourced integrated methanol/DME/DMC catalysis approach to polygeneration energy systems design and an exergoeconomic analysis