Abstract:Improving carbon deposition resistance of Ni/YSZ anode in hydrocarbon fuels is crucial for the stability operation of solid oxide fuel calls (SOFCs). In this work, La0.8Sr0.2FeO3-delta (LSF) and Gd-doped CeO2 (GDC) are infiltrated into Ni-YSZ anodes for carbon deposition resistance, while LSF is infiltrated into YSZ cathode backbone for oxygen reduction reaction. The structure design allowed simultaneously fabrication of cathode and anode catalyst, greatly simplifying the preparation process. The distribution of relaxation times (DRT) method is applied to isolate the contributions of electrode polarization processes and illuminate the role of infiltrated LSF and GDC. It is found that LSF nano particles layer reduces the electrocatalysis of Ni, which increases the resistance associating to mass transfer process in H-2 or CH4 conversion. As compared with LSF, GDC can improves the electrochemical performance of cell, due to its high ionic conductivity, extending the three phase boundary and facilitating the charge transfer process. For the stability test in wet CH4, cells with LSF and GDC modified anode show excellent carbon deposition resistance, where no significant performance degradation is occurred in more than 100 h operation at 0.25 A.cm(-2) and 750 degrees C. This is ascribed to the LSF and GDC inhibiting carbon deposition process. (C) 2018 The Electrochemical Society.

Reaction Process in the Ni–ScSZ Anode for Hydrocarbon Fueled SOFCs

Feasibility of Liquid Hydrocarbon Fuels for SOFC with Ni–ScSZ Anode

Stability of Ni Base Anode for Direct Hydrocarbon SOFCs

Effect of Ceria Components on Anode Performance of Ni-base Anode in Hydrocarbon Fueled SOFC

Feasibility of Ni-based cermet anode for direct HC SOFCs: Fueling ethane at a low S/C condition to Ni–ScSZ anode-supported cell

Attempt of Utilizing Liquid Fuels with Ni?ScSZ Anode in SOFCs

Reaction Process in the Ni-SDC Cermet Anode

Materials and Reaction Mechanisms at Anode/Electrolyte Interfaces for SOFCs

Imaging of CH4 Decomposition Around the Ni/YSZ Interfaces under Anodic Polarization

Review of Anodic Reactions in Hydrocarbon Fueled Solid Oxide Fuel Cells and Strategies to Improve Anode Performance and Stability

Investigation of Carbon Formation on Ni/YSZ Anode of Solid Oxide Fuel Cell from CO Disproportionation Reaction

Feasibility of n-Dodecane Fuel for Solid Oxide Fuel Cell with Ni-ScSZ Anode

Anode Degradation in SOFC: Fuel Impurity Effects on Nickel Component

Anode supported SOFC fabricated with functional anode: role of variation of fuel and oxidants

Redox of Ni/YSZ Anodes and Oscillatory Behavior in Single-Chamber SOFC under Methane Oxidation Conditions

Anode Catalyst Layers for Direct Hydrocarbon and Internal Reforming SOFCs

Atomic scale understanding of the role of Ni/XSZ interface in internal reforming SOFC in low CH 4 /H 2 O environment

Stability of Ni-YSZ Anode for SOFCs in Methane Fuel: the Effects of Infiltrating La0.8Sr0.2FeO3-δand Gd-Doped CeO2Materials

Anode Catalysts for Solid Oxide Fuel Cells That Run Directly on Hydrocarbon Fuels

Thermodynamic and Experimental Assessment of Proton Conducting Solid Oxide Fuel Cells with Internal Methane Steam Reforming

Experimental Study of the Carbon Deposition from CH4 Onto the Ni/YSZ Anode of SOFCs