Abstract:ConspectusIn this Account, we demonstrate an increasing complexity approach to gain insight into the principal aspects of the surface and interface chemistry and catalysis of solid oxide fuel cell (SOFC) anode and electrolyte materials based on selected oxide, intermetallic, and metal-oxide systems at different levels of material complexity, as well as into the fundamental microkinetic reaction steps and intermediates at catalytically active surface and interface sites. To dismantle the complexity, we highlight our deconstructing step-by-step approach, which allows one to deduce synergistic properties of complex composite materials from the individual surface catalytic properties of the single constituents, representing the lowest complexity level: pure oxides and pure metallic materials. Upon mixing and doping the latter, directly leading to formation of intermetallic compounds/alloys in the case of metals and oxygen ion conductors/mixed ionic and electronic conductors for oxides, a second complexity level is reached. Finally, the introduction of an (inter)metall(ic)-(mixed) oxide interface leads to the third complexity level. A shell-like model featuring three levels of complexity with the unveiled surface and interface chemistry at its core evolves. As the shift to increased complexity decreases the number of different materials, the interconnections between the studied materials become more convoluted, but the resulting picture of surface chemistry becomes clearer. The materials featured in our investigations are all either already used technologically important or prospective components of SOFCs (such as yttria-stabilized zirconia, perovskites, or Ni-Cu alloys) or their basic constituents (e.g., ZrO2), or they are formed by reactions of other compounds (for instance, pyrochlores are thought to be formed at the YSZ/perovskite phase boundary). We elaborate three representative case studies based on ZrO2, Y2O3, and Y-doped ZrO2 in detail from all three complexity levels. By interconnection of results, we are able to derive common principles of the influence of surface and interface chemistry on the catalytic operation of SOFC anode materials. In situ measurements of the reactivity of water and carbon surface species on ZrO2- and Y2O3-based materials represent levels 1 and 2. The highest degree of complexity at level 3 is exemplified by combined surface science and catalytic studies of metal-oxide systems, oxidatively derived from intermetallic Cu-Zr and Pd-Zr compounds and featuring a large number of phases and interfaces. We show that only by appreciating insight into the basic building blocks of the catalyst materials at lower levels, a full understanding of the catalytic operation of the most complex materials at the highest level is possible.

Materials and Reaction Mechanisms at Anode/Electrolyte Interfaces for SOFCs

Interfacial Interaction Between Ni and Oxide in SOFC Anodes

The Relation of Microstructure, Materials Properties and Impedance of SOFC Electrodes: A Case Study of Ni/GDC Anodes

Cu–CeO2/YSZ electrodes for SOFCs: role of cermet meso/nanostructure in methane oxidation

Direct modeling of the electrochemistry in the three-phase boundary of solid oxide fuel cell anodes by density functional theory: a critical overview

A Photolithographic Process for Investigation of Electrode Reaction Sites in Solid Oxide Fuel Cells

Experimental Characterization and Elementary Reaction Modeling of Solid Oxide Electrolyte Direct Carbon Fuel Cell

NH3-Fed Patterned Electrode Solid Oxide Fuel Cell: Experimental Performance Characterization and Elementary Reaction Modeling

Elementary Reaction Models for CO Electrochemical Oxidation on an Ni/YSZ Patterned Anode

Increasing Complexity Approach to the Fundamental Surface and Interface Chemistry on SOFC Anode Materials

Recent Progress on the Materials of Oxygen Ion-Conducting Solid Oxide Fuel Cells and Experimental Analysis of Biogas-Assisted Electrolysis over a LSC Anode

Recent advances and influencing parameters in developing electrode materials for symmetrical solid oxide fuel cells

Temperature-dependent chemical incompatibility between NiO-YSZ anode and alkaline earth metal oxides: Implications for surface decoration of SOFC anode

Enhancing coking resistance of Ni/YSZ electrodes: In situ characterization, mechanism research, and surface engineering

Advances in Cathode Materials for Solid Oxide Fuel Cells: Complex Oxides without Alkaline Earth Metal Elements

Cathode Processes and Materials for Solid Oxide Fuel Cells with Proton Conductors As Electrolytes

Modeling and prediction of structural/thermophysical properties of sintered NiO/YSZ anode for SOFC by molecular dynamics method

An Anode-Supported Micro-Tubular Solid Oxide Fuel Cell with Redox Stable Composite Cathode

Active Electrode for Ammonia Direct Utilization and the Reactivity of Metal Component in High-Temperature SOFCs

Advanced Multi-Metallic SOFC Anode Development by Mechanical Alloying Route

An Analytical Model for an Anode-Supported Solid Oxide Fuel Cell