Abstract:In the article, pure gadolinium doped ceria (GDC) is considered as a fuel electrode in high temperature CO2 electrolysis utilizing electrolyte‐supported single cells. The electrochemical performance and long–term stability are investigated and compared with state‐of‐the‐art materials. By impedance and distribution of relaxation time analysis the processes during several operation conditions are evaluated. In this work, the performance, electrochemical processes, and stability of GDC (Ce0.8Gd0.2O1.9) fuel electrode containing single cells (GDC/8YSZ/GDC/LSCF) were examined in CO2 electrolysis conditions. The current density and area specific resistance is determined for different operation conditions. The examined cells showed a higher performance compared to state‐of‐the‐art Ni−YSZ fuel electrode (Ni‐YSZ/8YSZ/GDC/LSCF) based single cells with a similar production route. Furthermore, the cells were examined by means of electrochemical impedance spectroscopy (EIS) and the recorded data were evaluated by the distribution of relaxation times (DRT) analysis. An equivalent circuit model (ECM) consisting of four time constants and a Gerischer impedance (LR−RQ1−RQ2−G−RQ4−RQ5) was established to gain further insight into the individual processes in the cells. For instance, the low–frequency process P5 referring to RQ5 is the rate‐determining step in CO2 electrolysis and is assigned to a surface reaction including the charge transfer and possibly the gas diffusion in the GDC fuel electrode. A long–term stability test was performed in CO2 electrolysis conditions at 900 °C with a constant current load of −0.5 A ⋅ cm−2 for up to 1200 h. A degradation rate of 62 mV ⋅ kh−1 was observed. By EIS analysis, a similar contribution of the ohmic and polarization resistances to the degradation was determined. The low–frequency process P5 and thus the surface reaction including the charge transfer in the GDC fuel electrode is contributing most to the increase in polarization resistance. After the long–term stability test, scanning electron microscopy (SEM) analysis was carried out and a coarsening of GDC particles in the fuel electrode was observed.

The Relation of Microstructure, Materials Properties and Impedance of SOFC Electrodes: A Case Study of Ni/GDC Anodes

Hierarchically oriented macroporous anode-supported solid oxide fuel cell with thin ceria electrolyte film.

Anode Performance of Mn-doped Ceria–scsz for Solid Oxide Fuel Cell

Development of Nanostructured Lanthanum Strontium Cobalt Ferrite/Gadolinian-Doped Ceria Composite Electrodes of Solid Oxide Cells Formed by In Situ Polarization

Direct modeling of the electrochemistry in the three-phase boundary of solid oxide fuel cell anodes by density functional theory: a critical overview

Modeling and prediction of structural/thermophysical properties of sintered NiO/YSZ anode for SOFC by molecular dynamics method

Influence of Electrode Design and Contacting Layers on Performance of Electrolyte Supported SOFC/SOEC Single Cells

Electrochemical performance and redox stability of solid oxide fuel cells supported on dual-layered anodes of Ni-YSZ cermet and Ni–Fe alloy

The Influence of the Anode Structure on the Electrical Properties of a Solid Oxide Fuel Cell

Performance/structure correlation for composite SOFC cathodes

Simulation of Eis Spectra and Polarization Curves Based on Ni/Ysz Patterned Anode Elementary Reaction Models

Impact of nickel on the surface reaction in ceria-based electrodes for solid oxide cells

Performance of Ni/Scsz Cermet Anode Modified by Coating with Gd0.2ce0.8o2 for an Sofc Running on Methane Fuel

Influence of Surface State on the Electrochemical Performance of Nickel-Based Cermet Electrodes during Steam Electrolysis

Gadolinium Doped Ceria as Nickel–Free Fuel Electrode in High Temperature CO2‐Electrolysis

High performance low temperature solid oxide fuel cells with novel electrode architecture

Cu–CeO2/YSZ electrodes for SOFCs: role of cermet meso/nanostructure in methane oxidation

A Hierarchical Porous Microstructure for Improving Long-Term Stability of Ni1-Xcux/Sdc Anode-Supported It-Sofcs Fueled with Dry Methane

Ni / GDC Fuel Electrode for Low-Temperature SOFC and its Aging Behavior Under Accelerated Stress

Influence of Microstructure on the Sulfur Tolerance of Ceria-Based Anodes in Low Temperature SOFC

Heterogeneous electrocatalysis in porous cathodes of solid oxide fuel cells