Abstract:The Ag-Cu alloys have received attention due to their excellent electrical and mechanical properties. However, the analytical research on why the mechanical properties of the Ag-Cu alloys increase after a small amount of Cu atoms are added is still lacked. In this work, the classical molecular dynamics (MD) simulations method was used to establish the Ag-Cu alloy models with different Cu contents. The tensile deformation mechanism of Ag-Cu alloy at room temperature was revealed from the atomic scale through the analysis of the stress-strain behavior and the evolution of dislocations. During the simulations, the embedded atom method (EAM) potential was used to describe the interaction between Ag atom and Cu atom. The uniaxial tensile deformation and nanostructure evolution of Ag-3 at.% Cu, Ag-6 at.% Cu and Ag-10 at.% Cu alloy models at the temperature of 300 K and the strain rate of 0.02 Å/ps were studied in detail. Results show that the internal stress was generated due to the large lattice mismatch among Ag atom, Cu cluster and the grain boundary. It results in the formation of dislocation and the negative initial stress at the beginning stage of Ag-Cu alloy models under tension. The dislocation firstly nucleates at the grain boundary and the growth rate of dislocation is slow before the crack propagation, and the complex dislocation reactions also exist. With the increase of Cu content, the tensile strengths of Ag-Cu alloys also increase. Cracks mainly form at the intersection of multiple grains, and the fracture mode changes from the intergranular fracture to the intergranular fracture and transgranular fracture after the unstable propagation of cracks. Meanwhile, a plenty of Cu atoms are distributed in the form of clusters in Ag matrix. They hinder the slip of dislocation and slow the relative sliding between atomic layers, and thus finally improves the deformation resistance to the plastic deformation of Ag-Cu alloy. The study on the tensile deformation behavior of Ag-Cu alloy at room temperature has certain guiding significance for the practical production and application of the design of Ag-Cu alloy.

The Physical Property Models and Theoretical Value Calculation of W-Cu Alloy

Mechanical Properties and Parameter Determination of Anand Viscoplastic Constitutive Model for Pb-free Solder Alloys

A High-Throughput Search for Composition–Phase–Property Relations of Cu–Ni/Ti–Al Elastic Copper Alloys

An empirical law for the elastic moduli of component-segregated W/Cu compounds

Constitutive modeling of two-phase metallic composites with application to tungsten-based composite 93W-4.9Ni-2.1Fe

The tensile behaviors of Ag-Cu alloys with different Cu contents: Molecular dynamics simulations study

The influence of percentage composition of Cu on the properties of W-Cu alloy produced by hot extrusion

A First-Principles Study of the Mechanical and Thermodynamic Properties of WTi, WV, W2Zr, WVTi, WVZr Alloys

Structural and Thermodynamic Properties of Liquid Transition Metals with Different Embedded-Atom Method Models

Thermodynamic, Kinetic and Strength Calculation of High Zinc Containing Al-Zn-Mg-Cu Alloys

Measurement and description of the stress-strain curves of W-40%Cu alloy

Insight into the Influence of Alloying Elements on the Elastic Properties and Strengthening of Copper: A High-Throughput First-Principles Calculations

Theoretical investigation of energetics and mechanical properties of intermetallics in copper clad aluminum composite

The Effect of Cu Content on the Microstructure and Properties of the Wire Arc Additive Manufacturing Al-Cu Alloy

Theoretical study of mechanical and thermodynamic properties of W–Fe alloys: Promising ultra-high temperature alloy materials

Study into Quasi-Static Compressive Properties of W-Cu Alloy

First-Principles Calculations of Structural and Mechanical Properties of Cu–Ni Alloys

Evaluation of Cu Content on Mechanical Performance and Castability of AlMg5.4Si2 Alloy

Improvement of Calculation Method for the Activity Coefficient of Multi-component Alloys

Theoretical Calculation and Experiment of Linear Expansion Coefficient of Metal