Abstract:The tailoring by the process of the properties developed in the plastic objects is the more effective way to improve the sustainability of the plastic objects. The possibility to tailor to the final use the properties developed within the molded object requires further understanding of the relationship between the properties of the plastic objects and the process conduction. One of the main process parameters that allow adjusting the properties of molded objects is the mold temperature. In this work, a thin electrical heater was located below the cavity surface in order to obtain rapid and localized surface heating/cooling cycles during the injection molding process. An isotactic polypropylene was adopted for the molding tests, during which surface temperature was modulated in terms of values and heating times. The modulation of the cavity temperature was found able to control the distribution of relevant morphological characteristics, thus, properties along the sample thickness. In particular, lamellar thickness, crystallinity distribution, and orientation were analyzed by synchrotron X-ray experiments, and the morphology and elastic modulus were characterized by atomic force microscopy acquisitions carried out with a tool for the simultaneous nanomechanical characterization. The crystalline degree slightly increased with the cavity temperature, and this induced an increase in the elastic modulus when high temperatures were adopted for the cavity surface. The cavity temperature strongly influenced the orientation distribution that, on its turn, determined the highest values of the elastic modulus found in the shear layer. Furthermore, although the sample core, not experiencing a strong flow field, was not characterized by high levels of orientation, it might show high values of the elastic modulus if temperature and time during crystallization were sufficient. In particular, if the macromolecules spent adequate time at temperatures close to the crystallization temperature, they could achieve high levels of structuring and, thus, high values of elastic modulus.

Experimental Study of Polymer Ultrasonic Plastification

Study on Semi-Continuous Bulk Polymerization for Impact-Resistant SMA in a Pilot Plant

Ultrasonic plasticization micro-injection molding technology: characterization of replication fidelity and wettability of high-depth microstructure

A study on ultrasonic welding of thermoplastics with significant differences in physical properties under different process parameters

Fabrication of Plastic Micro Features on Microporous Mold by Hot Embossing

Proposal of A New Ultrasonic Welding Technique for Thermoplastic Polymer

Effect of rapid heating cycle injection mold temperature on crystal structures, morphology of polypropylene and surface quality of plastic parts

Micro Ultrasonic Powder Molding for Semi-Crystalline Polymers

Effect of Rapid Mold Heating on the Structure and Performance of Injection-Molded Polypropylene

Study on the fusion properties of extruded foaming rigid PVC

Study on the Mechanism of Interfacial Friction Heating in Polymer Ultrasonic Plasticization Injection Molding Process

In-situ ultrasonic measurement of molten polymers during injection molding

Experimental study on mechanical behaviors of injection molded PC/PMMA blends

Surface and volume effects in multimodal ultrasonic vibration assisted micro-extrusion forming: Experiments and modelling

Investigation of 2D ultrasonic-assisted micro-injection molding

Effect of processing parameters, antistiction coatings, and polymer type when injection molding microfeatures

Simultaneously achieving self-toughening and self-reinforcing of polyethylene on an industrial scale using volume-pulsation injection molding

Micro-extrusion Molding of Ultrasonic-assisted Polypropylene Five-lumen Catheter

ADVANCE IN RESEARCH FOR THE EFFECT OF THE ULTRASONIC FIELD ON THE PROCESSING OF POLYMER

Effect of Micro-Mold Cavity Dimension on Structure Andproperty of Polylactic Acid/Polycaprolactone Blend Undermicroinjection Molding Conditions

Two-Phase Structure of Micro Ultrasonic Powder Molding Ultra-High Molecular Weight Polyethylene Parts