Abstract:Ultrasonic plasticization micro-injection molding technology effectively reduces the viscosity of polymer melts while amalgamating the benefits of high efficiency and energy conservation, presenting unique advantages in the precise fabrication of polymer surface microstructures. This study employed electrical discharge wire cutting technology and ultrasonic plasticization micro-injection molding technology to meticulously prepare hydrophobic microstructures with varying depths on polymer surfaces. Electrical discharge wire cutting technology was utilized to incise microstructures on the surface of 316 stainless steel, serving as mold cores. Subsequently, ultrasonic plasticization micro-injection molding technology replicated the mold cores' surface. Molding experiments demonstrated that the method achieves precise molding of polymer surface microstructures, with the maximum molding height of groove microstructures reaching 238.2 μm and a peak replication fidelity of 97.4%. Fluidity, XRD, and wettability analyses revealed that ultrasonic vibration mitigated the viscosity of polymer melts; the emergence of microstructures did not alter the polymer surface's crystal structure; the polymer surface exhibited significant hydrophobicity with a maximum contact angle of 132.1°, and both the depth and shape of microstructures influenced the polymer surface's wettability. During this research, theoretical support and technical guidance will be provided for the efficient and precise molding of polymer microstructure surfaces with hydrophobic properties.

Fabrication of Plastic Micro Features on Microporous Mold by Hot Embossing

Fabrication of dumbbell shape microstructures by hot embossing through microporous mould

Study on Polymer Flow Profile in Micro Hot Embossing

Fabrication of a Metal Micro Mold by Using Pulse Micro Electroforming

Experimental Study on the Hot Embossing Polymer Microfluidic Chip

Rapid Fabrication of Plastic Microfluidic Channels Using PDMS As Hot Embossing Tools

Ultrasonic plasticization micro-injection molding technology: characterization of replication fidelity and wettability of high-depth microstructure

Flow Behavior of Polymer During Micro Hot Embossing

3D printed metal molds for hot embossing plastic microfluidic devices

Research on Optimization of the Hot Embossing Process

Using Silicon Molds for Ultrasonic Embossing on Polymethyl Methacrylate (PMMA) Substrates

Optimization of Control Parameters in Micro Hot Embossing

Surfactant-added hydrophilic polydimethylsiloxane (PDMS) as mold material for thermoplastic hot embossing process

Experimental Study on the Fabrication of the Light Guide Plate with Hot Embossing Method

Defects in Micro Hot Embossing Process

Mechanical modification of PDMS by blending with nano particles as hot embossing mold

Micro Structure Fabrication with a Simplified Hot Embossing Method

Enhanced Polymer Filling and Uniform Shrinkage of Polymer and Mold in A Hot Embossing Process

Study of Hot Embossing Using Nickel and Ni–PTFE LIGA Mold Inserts

Research on Heat Transfer for Hot Embossing of Polymeric Microfluidic Chips

Effect of process parameters on filling behavior of PMMA in hot embossing