Abstract:A feasibility study on the compensation of 3D mispositioning errors of the probe occurring in the characterization of a long antenna, via a non-redundant (NR) near to far-field (NTFF) transformation with helicoidal scan, is conducted in this article. Such types of errors can result from imperfections in the rail driving the linear motion of the probe and from an imprecise synchronization of the linear and rotational movements of the probe and the antenna when drawing the scan helix. To correct them, an approach, which proceeds through two steps, is proposed. The former step uses a technique called cylindo rical wave (CW) correction for compensating the phase of the near-field (NF) samples, which, owing to the rail imperfections, result in not being acquired over the measurement cylinder surface. The latter exploits an iterative scheme to restore the samples at the sampling points required by the adopted NR representation along the scan helix from those obtained by applying the CW correction technique and impaired by 2D mispositioning errors. The so compensated NF samples are then effectively recovered via a 2D optimal sampling interpolation (OSI) scheme to accurately obtain the input data required to carry out the standard cylindrical NTFF transformation. The OSI representation is determined here by assuming a long antenna under test as enclosed in a prolate ellipsoid or cylinder ending into two hemispheres (cigar) in order to make, depending on the particular geometry of the considered antenna, the representation effectively non-redundant. The reported numerical simulation results show the capability of the proposed approach to compensate even severe 3D mispositioning errors, thus enabling its usage in a real measurement scenario.

Implementation of the near-field signal redundancy phase-aberration correction algorithm on two-dimensional arrays.

The Cross Algorithm for Phase-Aberration Correction in Medical Ultrasound Images Formed with Two-Dimensional Arrays

Timing-error-difference Calibration of a Two-Dimensional Array Imaging System Using the Overlapping-Subaperture Algorithm

An Efficient Near-Field Model Gain-Phase Self-Calibration Method for Uniform Rectangular Arrays

Iteration-Free-Phase Retrieval for Directive Radiators Using Field Amplitudes on Two Closely Separated Observation Planes

A Method for Active Three-Dimensional Array Calibration

Sub-Reflectarrays For Spherical Aberration Compensation: Concept And Simulations

An Efficient Procedure to Compensate for the Errors Due to the Probe Mispositioning in a Cylindrical Near-Field Facility

Near-Field Localization for Non-circular Sources in the Presence of Sensor Phase Uncertainties

Near-Field Phased Array Diagnostics by a Subspace Projection Method

A Novel Planar Sparse Array Design for Two-Dimensional Direction Estimation with Increased Degrees of Freedom

Investigation of active phased arrays performance deficiency due to array planarity and misalignment

Effect Of Array Errors On Performance Of 2-D Processing In Airborne Radar And Compensation Method

A Cascade Method for Two Kinds of Errors Calibration in Array.

Dual Beam Deflection of Liquid Crystal Optical Phased Array

Gain and Phase Calibration Algorithm of Near-field Source Based on Instrumental Sensors

Comparison of Phase Extraction Algorithms in Testing of Phase Defects with Two-Point Interference

On Relaxed Averaged Alternating Reflections (Raar) Algorithm For Phase Retrieval With Structured Illumination

Correction of Tissue-Motion Effects on Common-Midpoint Signals Using Reciprocal Signals.

Three-Dimensional Probe Mispositioning Errors Compensation: A Feasibility Study in the Non-Redundant Helicoidal Near to Far-Field Transformation Case

Mixed Near-Field and Far-Field Sources Localization Using the Uniform Linear Sensor Array