Abstract:The increasing focus on the development of positioning techniques reflects the growing interest in applications and services based on indoor positioning. Many applications necessitate precise indoor positioning or tracking of individuals and assets, leading to rapid growth in products based on these technologies in certain market sectors. Ultrasonic systems have already proven effective in achieving the desired positioning accuracy and refresh rates. The typical signal used in ultrasonic positioning systems for estimating the range between the target and reference points is the linear chirp. Unfortunately, it can undergo shape aberration due to the effects of acoustic diffraction when the aperture exceeds a certain limit. The extent of the aberration is influenced by the shape and size of the transducer, as well as the angle at which the transducer is observed by the receiver. This aberration also affects the shape of the cross-correlation, causing it to lose its easily detectable characteristic of a single global peak, which typically corresponds to the correct lag associated with the signal's time of arrival. In such instances, cross-correlation techniques yield results with a significantly higher error than anticipated. In fact, the correct lag no longer corresponds to the peak of the cross-correlation. In this study, an alternative technique to global peak detection is proposed, leveraging the inherent symmetry observed in the shape of the aberrated cross-correlation. The numerical simulations, performed using the academic acoustic simulation software Field II, conducted using a typical ultrasonic chirp and ultrasonic emitter, compare the classical and the proposed range techniques in a standard office room. The analysis includes the effects of acoustical reflection in the room and of the acoustic noise at different levels of power. The results demonstrate that the proposed technique enables accurate range estimation even in the presence of severe cross-correlation shape aberrations and for signal-to-noise ratio levels common in office and room environments, even in presence of typical reflections. This allows the use of emitting transducers with a much larger aperture than that allowed by the classical cross-correlation technique. Consequently, it becomes possible to have greater acoustic power available, leading to improved signal-to-noise ratio (SNR).

Correction of Tissue-Motion Effects on Common-Midpoint Signals Using Reciprocal Signals.

Timing-error-difference Calibration Using Reciprocal Signals

Coherence-based Phase Aberration Correction and Beamforming for Ring-Array Ultrasound Imaging

Comparative analysis of mid-spatial frequency errors measurement using multiple phase retrieval algorithms

Strategies to Improve Intratrain Prospective Motion Correction for Turbo Spin‐echo Sequences with Constant Flip Angles

The Cross Algorithm for Phase-Aberration Correction in Medical Ultrasound Images Formed with Two-Dimensional Arrays

Beneficial Effects of Self-Motion for the Continuous Phase Analysis of Ac-Coupled Doppler Radars

Phase Correction in Asynchronous FMCW Radar Systems for Accurate Noncontact Cardiopulmonary Monitoring

Timing-error-difference Calibration of a Two-Dimensional Array Imaging System Using the Overlapping-Subaperture Algorithm

Correction of high-rate motion for photoacoustic microscopy by orthogonal cross-correlation

Ultrasound Rebeamforming Based Phase Aberration Correction

Implementation of the near-field signal redundancy phase-aberration correction algorithm on two-dimensional arrays.

Simultaneous multislice EPI prospective motion correction by real-time receiver phase correction and coil sensitivity map interpolation

Ultrasound Aberration Correction based on Local Speed-of-Sound Map Estimation

Improving the Tracking Accuracy of TDMA-Based Acoustic Indoor Positioning Systems Using a Novel Error Correction Method

A Novel Phase Distortion Correction Method Based on Temporal Correlation Matrix

A Method for Correcting Signal Aberrations in Ultrasonic Indoor Positioning

Performance Comparison of Rigid and Affine Models for Motion Estimation Using Ultrasound Radio-Frequency Signals

Baseline offset correction technique for terahertz signals based on improved wavelet multiresolution analysis

Doppler Correction Using Short-Time MUSIC and Angle Interpolation Resampling for Wayside Acoustic Defective Bearing Diagnosis.

Ray Theory-Based Transcranial Phase Correction for Intracranial Imaging: A Phantom Study