Abstract:The impact strength of nylon 6 (polyamide 6) can be improved by blending impact strength modifier at ambient temperature and then the applications of nylon 6 can be expanded widely. Polyamide (6) PA 6/poly(ethylene-1-octene) elastomer (POE)/poly(ethylene-1-octene) elastomer grafted by maleic anhydride (POE-g-MA) ternary blends were prepared in corotating twin-screw extruder by two kinds of extrusion processes, more than 10-fold increase of impact strength at ambient temperature was obtained from impact test of specimens, not at much expense of tensile properties. The influence of extrusion process, that is, one- and two-step extrusion, on the micromorphology of toughing nylon 6 blends was investigated systematically. Scanning electron microscopy was used to observe the fracture surfaces of bars prepared by injection-molding machine. In addition to particle size and distribution, interparticle distance ( τ) between neighboring dispersed phase particles in PA6/POE-g-MA/POE ternary blends was calculated and used to characterize the micromorphology. Supertoughness was obtained in both ternary blends, and the interparticle distances ( τ) were 0.228 and 0.179 μm, respectively, which were less than the critical τ c (0.3 μm) in nylon/rubber blends. The results showed that more homogeneous distribution of POE phase in nylon 6 matrix was found in blends prepared by two-step extrusion method, in which the average particle size of POE phase was 0.313 μm, while the average particle size in blends prepared by one-step method was 0.399 μm. The half-peak width of Gaussian distribution curve of particle size in blends prepared by one-step extrusion method was 0.278, which is higher than that of blends prepared by two-step method with the value of 0.248.

NETWORK STRUCTURED TOUGHENING OF PA6/PC ALLOY

Research on Toughening Modification of Copolymerized Polypropylene Using Polyolefin Elastomers

Study on Properties of PA6/PC/POE/HDI Composites

Relationship between structure and properties in high-performance PA6/SEBS-g-MA/(PPO/PS) blends: The role of PPO and PS

Toughening Mechanism of Long Chain Branched Polyamide 6

Investigation of Dual Network Construction for Toughening in Bio-Based Polyamide Composites

Toughening Behavior and Morphology Study of PA6/thermal Liquid Crystalline Polyamide Blends

Preparation of Poly(Phenylene Oxide)/Polyamide-6 Nanocomposites with High Tensile Strength and Excellent Impact Performance

In Situ Formation of the Core–Shell Particles and Their Function in Toughening PA6/SEBS-g-MA/PP Blends

Preparation of a Structured Acrylic Impact Modifier and Its Application in Toughening Polyamide 6

STUDY ON TOUGHENING OF PA6/POE-g-MAH/NANO BaSO_4 BLENDS

Preparation and performance study of POE-g-MAH/GMA toughened bio-based PA56 alloys

Study on high-strength and high-toughness PA6/POE-g-MAH/MWNTs ternary composites

Toughness enhancement of polyamide 6,12 with intermolecular hydrogen bonding with 3‐pentadecylphenol

Multi-network Reinforced Structure of PET/PC Alloys by Low Temperature Solid-state Reactive Blend

Morphologies, interfacial interaction and mechanical performance of super-tough nanostructured PK/PA6 blends

Preparation and Study on PP/PA6 Composites with High Modulus and Strength

Preparation and Property Study of PA56/POE-g-MAH-GMA/PPO Ternary Alloy

Toughening modification of PBT/PC blends with PTW and POE

Microstructures and Mechanical Properties of Polypropylene/polyamide 6/Polyethelene-Octene Elastomer Blends

The influence of extrusion process on micromorphology of PA 6/POE/POE-g-MA ternary blends: A quantitative analysis