Abstract:Based on the intramolecular energy transfer, relative gains of 10.5 and 8.5 dB cm−1 at 1535 and 1550 nm respectively are demonstrated in ErIII coordination polymer [Er(DBTTA)3(FDPO)]n‐doped waveguides under excitations of light‐emitting diode instead of laser pumping. This study is expected to achieve the application of polymer waveguide amplifiers in planar photonic integration and facilitate low‐cost packaging of the waveguide and pump sources. 9,9‐bis (diphenylphosphorylphenyl) fluorene (FDPO) and dibenzotetrathienoacene (DBTTA), are synthesized as the neutral and anionic ligands, respectively, to prepare the ErIII coordination polymer [Er(DBTTA)3(FDPO)]n. Based on the intramolecular energy transfer, optical gains at 1.5 μm are demonstrated in [Er(DBTTA)3(FDPO)]n‐doped polymer waveguides under excitations of low‐power light‐emitting diodes (LEDs) instead of laser pumping. A ligand‐sensitization scheme between organic ligands and Er3+ ions under an excitation of an ultraviolet (UV) LED is established. Relative gains of 10.5 and 8.5 dB cm−1 are achieved at 1.53 and 1.55 μm, respectively, on a 1‐cm‐long SU‐8 channel waveguide with a cross‐section of 2 × 3 μm2 and a 1.5‐μm‐thick [Er(DBTTA)3(FDPO)]n‐doped polymethylmethacrylate (PMMA) as upper cladding. The ErIII coordination polymer [Er(DBTTA)3(FDPO)]n can be conveniently integrated with various low‐loss inorganic waveguides to compensate for optical losses in the C‐band window. Moreover, by relying on the intramolecular energy transfer and UV LED top‐pumping technology, it is easy to achieve coupling packaging of erbium‐doped waveguide amplifiers (EDWAs) with pump sources in planar photonic integrated chips, effectively reducing the commercial costs.

Er3+–Yb3+ co-doped glass waveguide amplifiers using ion exchange and field-assisted annealing

Erbium-ytterbium co-doped aluminium oxide waveguide amplifiers fabricated by reactive co-sputtering and wet chemical etching

Toward a10 dB net-gain waveguide amplifier in an Er3+-Yb3+ co-doped phosphate glass

Er3+/Yb3+ Co-Doped Waveguide Amplifier and Lossless Power Splitter Fabricated by A Two-Step Ion Exchange on A Commercial Phosphate Glass

Toward a 10 Db Net-Gain Waveguide Amplifier in an Er3+-Yb3+ Co-Doped Phosphate Glass

Study on Er3+-Yb3+ co-doped La2O3–Al2O3 glasses for C-band optical waveguide amplifier with high luminous efficiency and low pump threshold

Gain and noise characteristics of phosphate glass Er^3+ – Yb^3+ co-doped waveguide amplifiers

Erbium-doped Ga2O3 waveguide for optical amplification

Gain and noise characteristics of phosphate glass $$\hbox {Er}^{3+}$$–$$\hbox {Yb}^{3+}$$Yb3+ co-doped waveguide amplifiers

Optical Amplification in Er/Yb Silicate Strip Loaded Waveguide

Er–Tm co-doped materials for on-chip ultra-broadband waveguide amplifier

Hybrid ${\rm Si}_{3}{\rm N}_{4}\hbox{-}{\rm Er}/{\rm Yb}$ Silicate Waveguides for Amplifier Application

A Low-Fabrication-Temperature Erbium-Based Waveguide Amplifier

Gain and noise characteristics of phosphate glass \hbox {Er}^{3+}–\hbox {Yb}^{3+} co-doped waveguide amplifiers

Ion-Exchanged Silica-On-Silicon Structured Channel Erbium-Doped Waveguide Amplifiers

A strategy for preparing broadband polymer based optical waveguide amplifiers: doping low crystal field symmetric nanocrystals in polymer matrix as gain media

High-order mode waveguide amplifier with high mode extinction ratio written in an Er3+-doped phosphate glass

Synthesis and study of novel erbium-doped La2O3-Al2O3 glasses for on-chip waveguide amplifier

A low-fabrication-temperature, high-gain chip-scale waveguide amplifier

Optical Amplification at 1.5 μm in ErIII Coordination Polymer‐Doped Waveguides Based on Intramolecular Energy Transfer

Improving extended L-band fiber amplifiers using Er 3+ : Y 3+ co-doped silicate with optimized alumino-phospho-silicate glass matrix