Abstract:Microalloying is of great importance for the property modulation of lightweight high-strength aluminum alloys. Little is known, however, about the properties and micromechanisms of Al-Mg-Si alloys microalloyed with Sn and Sc. In this work, the property changes of Al-0.5Mg-0.4Si (wt%) alloys induced by 0.1Sn and 0.1Sn-0.1Sc (wt%) additions and underlying alloying mechanisms are revealed by atomic-scale transmission electron microscopy and first-principles calculations. The results show that the Sn-Sc coaddition results in a decreased diameter and an increased number density of the Sc-containing constituent particles of Mg 2 Si and Mg 2 (Si,Sn), as compared to the sole Sn addition. The featured Si-site columns in β'', B' and β' structures can be occupied by Sn and Sc. Substantial peak-aging β'' needles with confined cross-sectional coarsening are observed for the Sn-Sc containing alloy compared to the Sn containing alloy. The modified constituent particles and precipitates improve the plasticity and strength of peak-aging Al-Mg-Si-Sn-Sc alloy. The elevated peak-aging corrosion resistance and over-aging thermal stability of Al-Mg-Si-Sn-Sc alloy are associated with the sparse Sc-containing Mg 2 (Si,Sn) grain boundary precipitates and low strain filed of Al matrix around the β' containing Sn/Sc, respectively. The obtained results are hoped to guide the design of high-performance Al alloys.

Effects of Sm Addition on Microstructure and Mechanical Properties of Mg–6Al–0.6Zn Alloy

Effects of Samarium Content on Microstructure and Mechanical Properties of Mg–0.5Zn–0.5Zr Alloy

Influence of Sm addition on microstructural and mechanical properties of as-extruded Mg–9Li–5Al alloy

Effect of Sm content on microstructure and properties of extruded Mg-6Al-2Sr alloy

Effects of 1.5 Wt% Samarium (sm) Addition on Microstructures and Tensile Properties of a Mg−6.0Zn−0.5Zr Alloy

Effect of Al addition on the grain refinement and mechanical properties of as-cast Mg–5Y–4Sm alloys

Influence of Al Addition on the Microstructure and Mechanical Properties of Mg-Zn-Sn-Mn-Ca Alloys

Enhanced mechanical properties and formability of hot-rolled Mg–Zn–Mn alloy by Ca and Sm alloying

The Effect of Gd and Zn Additions on Microstructures and Mechanical Properties of Mg-4sm-3nd-Zr Alloy

Effect of Ti Addition on the Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn Alloys

Effect of Combined Addition of La and Sm on Mechanical Properties, Microstructure Evolution, and Electrochemical Behavior of Mg-3Zn-1Mn/Sn-0.5Ca Alloy

The Microstructure and Mechanical Properties of As-cast Mg-10Gd-3Y-xZn-0.6Zr (x=0, 0.5, 1 and 2 Wt%) Alloys

Microstructure and Mechanical Properties of Mg-Xy-1.5mm-0.4zr Alloys

Effects of Zr and Mg alloying on microstructure and properties of Cu-Cr-Si alloys

The influence of adding samarium on the microstructure, mechanical performance and corrosion behavior of as-extruded AZ41 alloys

Improving the Mechanical Properties and Intergranular Corrosion Resistance of Al-9.2Mg-0.8Mn-0.2Zr Alloy by Sn Addition

Effects of Sn and Mn Addition on the Microstructure and Mechanical Properties of As-Extruded Mg–2Al–1Zn Alloys

Effects of Stannum on Microstructure and Mechanical Properties of Mg-Zn-Y-Zr Alloy

Effect of Sn content on microstructure and tensile properties of as-cast and as-extruded Mg−8Li−3Al−(1,2,3)Sn alloys

Effects of Zn Addition on the Microstructure, Tensile Properties and Formability of As-Extruded Mg-1Sn-0.5Ca Alloy

Sn-Sc microalloying-induced property improvement and micromechanisms of an Al-Mg-Si alloy