Abstract:In recent years, the research of hybrid composites reinforced by multiple reinforcements has received increasing attention because these composites have great potential to be tailored for various applications. In the present work, hybrid aluminum (Al) matrix composites reinforced with SiC particles and carbon fibers (SiCp-Cfs/Al composites) were fabricated by the colloidal dispersion and suction filtration method. It was found that SiCp-Cfs/Al composites had a dense structure and the carbon fibers and SiC particles were uniformly distributed in the Al matrix. The mechanical properties of SiCp-Cfs/Al composites with different reinforcement volume fractions were investigated. The results showed that the SiCp-Cfs/Al composites exhibited high tensile strength and elastic modulus (tensile strength 207 MPa and elastic modulus 92 GPa) when the volume fraction of SiC particles was 5% and the volume fraction of carbon fiber was 7%, which were significantly higher than that of SiCp/Al composites with 5% volume fraction of SiC particles (tensile strength 112 MPa and elastic modulus 80 GPa). The homogeneous distribution of carbon fibers and SiC particles in the Al matrix, which serves as co-reinforcing, is responsible for the high tensile strength and elastic modulus of SiCp-Cfs/Al composites. The coefficient of thermal expansion (CTE) of SiCp/Al composites and SiCp-Cfs/Al composites were measured at temperatures ranging from 25 °C and 400 °C. The results showed that the addition of carbon fibers caused the CTE of SiCp-Cfs/Al composites to be much lower than that of SiCp/Al composites.

The Thermal Expansion Behavior of Unidirectional SiC Fiber-Reinforced Cu–matrix Composites

Thermal Expansion Behavior of Carbon Fiber Reinforced Chemical-Vapor-infiltrated Silicon Carbide Composites from Room Temperature to 1400 °C

Influence of Reinforcement with Multimodal Distribution on Thermophysical Properties and Fracture Behavior in Al-Si/SiC Composites Infiltrated under Super-Gravity Field

EFFECTS OF FABRIC ARCHITECTURES ON THE THERMAL EXPANSION COEFFICIENT AND THE THERMAL DIFFUSIVITY OF CARBON FIBER REINFORCED SILICON CARBIDE COMPOSITES

In-plane thermal expansion behavior of dense ceramic matrix composites containing SiBC matrix

Thermal residual stress in continuous SiC fiber reinforced titanium matrix composites

Mechanical and thermal expansion behavior of hybrid aluminum matrix composites reinforced with SiC particles and short carbon fibers

Study of Interfacial Stress Distribution in SiC Fiber Reinforced Titanium Matrix Composites on Transverse Tensile Tests

Improving mechanical and thermal expansion properties of aluminum matrix composites reinforced by silicon carbide fiber

The Thermal Expansion Behaviour of SiCp/Al–20Si Composites Solidified under High Pressures

Bending and Thermal Expansion Properties of 3D-C_f/sic Composites

In-situ synthesis and microstructural evolution of a SiC reinforced Al-50Si composite exhibiting exceptional thermal properties

Effects of interphases on thermal expansion of 3D-C/SIC composites

Micromechanics-based thermal expansion characterization of SiC nanoparticle-reinforced metal matrix nanocomposites

Interfacial Reactions and Mechanical Properties Studies of C-Coated and C/B4C Duplex-Coated SiC Fiber-Reinforced Ti2AlNb Composites

Residual stress variation in SiCf/SiC composite during heat treatment and its effects on mechanical behavior

EFFECTS OF HEAT TREATMENT ON THERMAL EXPANSION OF 3D C/SiC COMPOSITES

Tensile behavior of the designed SiCf/Ti2AlNb/Ti17 composites

The structural effect of SiC form ceramic on the compressive strength and thermal expansion properties of Cu–SiC composites

High-temperature thermal expansion behaviour of C/SiC studied using an in-situ optical visualisation method and numerical simulations in a quartz lamp array heating environment

Microstructure and Interfacial Strength of SiC Fiber-Reinforced Ti17 Alloy Composites with Different Consolidation Temperatures