Abstract:The increasing demand for hydroxyapatite (HA) coatings with enhanced functionality have led to novel materials with compositions that are more closely resembling those of natural bone apatites. In the present study, selenium-substituted (Se-HA) powders with various Se quantities were prepared by chemical precipitation. By applying suspension plasma spray (SPS), the surface of Ti substrates was coated with corresponding Se-HA coatings. The microstructural and physicochemical properties of the powders and the coatings were studied. Analysis by x-ray diffraction indicates that SeO32- replaced the PO43- groups, affecting the crystal structure and crystallinity of HA. As the extent of Se substitution increases, the lattice volume expands and the crystallinity decreases. The synthesized Se-HA powders were confirmed to be calcium-deficient apatite through energy-dispersive x-ray spectroscopy. However, the high temperature of SPS accelerated volatilization of P, increasing the Ca/(P + Se) ratio of the coatings, whereas the chemical valence state of Se remained unchanged. The Se-HA coating exhibited a high bonding strength of >33 MPa, fully meeting the requirement of 15 MPa as coating implant materials. Dissolution behavior tests indicate that the Se-HA coatings had high solubility in comparison to the HA coating. As the substitution degree of Se increased, the dissolution rate also increased, which greatly enhanced the capacity to generate a bone-like apatite layer. In vitro cell experiments indicate that the Se-HA coatings exhibited excellent biocompatibility, and facilitated adhesion and proliferation of osteoblast MC3T3-E1, even in the presence of fluorine. Furthermore, antibacterial properties of Se-HA coatings were also indicated by inhibition of Staphylococcus aureus, which is the main cause of most infections after orthopedic surgeries. Thus, the Se-HA coatings have potential as implant coating materials for orthopedic applications.

Ha Coating with Different Crystallinity Percutaneously Implanted in Bone

In Vivo Comparison of Bone Formation on Titanium Implant Surfaces Coated with Biomimetically Deposited Calcium Phosphate or Electrochemically Deposited Hydroxyapatite

Effects of Zinc-Substituted Nano-Hydroxyapatite Coatings on Bone Integration with Implant Surfaces

Effects of biomimetically and electrochemically deposited nano-hydroxyapatite coatings on osseointegration of porous titanium implants.

Osteoblast Response to Porous Titanium Surfaces Coated with Zinc-Substituted Hydroxyapatite

Early Peri-Implant Osteogenesis with Functionally Graded Nanophase Hydroxyapatite/Bioglass Coating on Ti Alloys

Osteoblast Responses to Thin Nanohydroxyapatite Coated on Roughened Titanium Surfaces Deposited by an Electrochemical Process.

Longer-Term Mechanical And Biological Evaluation Of Titanium Alloy Coated With Apatite Layer

Biological and Biomechanical Behavior of Titanium Implants with Fluoridated Hydroxyapatite Coatings

Coating of hydroxyapatite on highly porous Al2O3 substrate for bone substitutes

Biological Efficacy of Modified Structure of Polymer Surfaces for Bone Substitute

Biomechanical comparison of biomimetically and electrochemically deposited hydroxyapatite-coated porous titanium implants.

Fabrication, Characterization, and in Vitro Studies of Selenium-substituted Hydroxyapatite Coatings

Characterization of Hydroxyapatite/Chitosan Composite Coating Obtained from Crab Shells on Low-Modulus Ti–25Nb–8Sn Alloy through Hydrothermal Treatment

Hydroxyapatite formation with the interface of chitin and chitosan

Effect of Strontium-Substituted Nanohydroxyapatite Coating of Porous Implant Surfaces on Implant Osseointegration in a Rabbit Model.

Preparation and biological evaluation of Nano-HA coating on tatinium surfaces

Characterization, mechanical properties, corrosion behaviour and bone-like apatite formation ability of fluorine substituted hydroxyapatite coating

Substituted hydroxyapatite coatings of bone implants.

Recent advances in multifunctional hydroxyapatite coating by electrochemical deposition

In Vitro Biological Performance of Nano-Particles on the Surface of Hydroxyapatite Coatings