Abstract:Nonisocyanate polyurethane (NIPU) was synthesized using different concentrations of C36‐alkylenediamine (C36DDA), hexamethylene diamine, and a cyclic carbonate monomer synthesized from bisphenol A epoxy resin and carbon dioxide. The structures, molecular weights, thermal behaviors, and stabilities of the NIPU copolymers were evaluated using 1H nuclear magnetic resonance, Fourier transform infrared spectroscopy, gel permeation chromatography, thermogravimetric analysis, and differential scanning calorimetry measurements. All synthesized NIPUs were amorphous and exhibited good Td−5% thermal stabilities above 250°C; Tg decreased from 73 to 51°C as C36DDA content increased from 0% to 10% based on dynamic mechanical analysis tests. Furthermore, ethylenediamine (EDA) as a chain extender incorporating a small amount of crosslinker 1,2,4,5‐benzenetetracarboxylic acid (PMA) can enhance the melt strength of a partially three‐dimensional network, and the attained NIPU showed elastic properties. Thus, the NIPU synthesized with 7.5% and 10% C36DDA containing small amounts of EDA and PMA were suitable choices for supercritical CO2 foaming; their morphologies and mechanical behaviors were examined by scanning electron microscopy and DMA, and the densities of foamed NIPU with 7.5% and 10% C36DDA were calculated as 432 and 215 kg m−3 with pore sizes of 10–20 μm, respectively. The maximum stresses were attained at 149.5 and 123.4 kPa, and the foamed NIPU displayed rigid foam behaviors owing to the compression behaviors of the stress–strain curves.

Characterization of Polyurethane Foams Prepared from Non‐pretreated Liquefied Corn Stover with PAPI

Mechanical Properties of Polyurethane Foams Prepared from Liquefied Corn Stover with PAPI.

Simultaneous Interpenetrating Polymer Networks of Polyurethane from Pentaerythritol–Modified Castor Oil and Polystyrene: Structure–Property Relationships

Optimization of Reaction Conditions for Polyurethane Foam Synthesis with Liquefied Corn Stalk by Response Surface Methodology

Optimization of Synthesis of Polyurethane Foam Prepared from Liquefied Corn Stover by Response Surface Methodology

Mechanical and Thermal Properties of Polyurethane Foams from Liquefied Sugar Beet Pulp

Study on the Pyrolytic Behaviors and Kinetics of Rigid Polyurethane Foams

Effects of catalysts on mechanical properties of polyuerthane foams based on corn stalk

Biodegradable Polyurethane Foam with Liquefied Product from Corn Stover

Processing and properties of rigid polyurethane foams based on bio-oils from microwave-assisted pyrolysis of corn stover

Dynamic Mechanical Properties of Polyurethane Foams Prepared from Liquefied Corn Stover with PMDI

Preparation and properties of novel poly(propylene oxide)-block- polylactide-based polyurethane foams

Preparation And Characterization Of Rigid Polyurethane Foam From Liquefied Bagasse

Synthesis and characteristics of nonisocyanate polyurethane composed of bio‐based dimer diamine for supercritical CO2 foaming applications

Extraction of Polyether from Poly(Propylene Carbonate) and Its Application in the Synthesis of Polyurethane

Preparation and performance of a novel polyimide foam

Preparation, Characterization and Thermal Degradation Behavior of Rigid Polyurethane Foam Using a Malic Acid Based Polyols

Study on Preparation of Biodegradable Polyurethane Foam

Optimizing the preparation parameters of eco‐friendly flexible polyurethane foams derived from a corn‐based bio‐polyol

Preparation and characterization of polyurethane foam using a PLA/PEG polyol mixture

Study on Preparation and Properties of Cellulose Ethanol Lignin Based Polyurethane Foam