Abstract:The C=C double bonds in the main chain of hydroxyl-terminated polybutadiene (DHTPB), obtained by the degradation of polybutadiene rubber, were partially epoxided using m-chloroperoxybenzoic acid (mCPBA) as epoxidation reagent. A series of epoxided HTPBs (EHTPB) with different epoxy contents (5%, 10% and 15%) were prepared by tuning the molar ratio of mCPBA to C=C double bonds. The structures of EHTPBs were characterized by Fourier transform-infrared (FTIR), nuclear magnetic resonance (H-1-NMR) spectroscopy and gel permeation chromatography (GPC). The epoxy percent in EHTPBs from H-1-NMR spectra was in accordance with the design. In addition, a series of EHTPB-based polyurethane elastomers (EPU) were prepared by the reaction between EHTPB and 4,4'-diphenylmethane diisocyanate with 1,4-butanediol as a chain extender. Mechanical and thermal properties of the EPU samples were characterized by tensile test, differential scanning calorimetry (DSC) and thermal gravity analysis (TGA). With increased epoxy percent in EHTPB, the Young's modulus and the tensile strength of the EPU samples increased, whereas the elongation at break decreased. The sample EPU10 prepared with 10% of epoxy had the best mechanical properties with 8.82 MPa as Young's modulus, 7.83 MPa as tensile strength, and (485 +/- 23)% as elongation at break. The elasticity recovery of the EPU sample was slightly better than HTPB-based PU (EPU0). The results with TGA test showed that the thermal degradation of EPU, similar to EPU0, was divided into three stages. However, the EPU samples had better thermal stability with the initial degradation temperature at 210 degrees C, about 30 degrees C higher than that of EPU0. The DSC results showed that the glass transition temperature (T-g) of EPU gradually increased as epoxy percent was increased, though still lower than that of HTPB (FHTPB) based PUs prepared by free-radical polymerization.

Thermal stability of flexible polyurethane foams containing modified layered double hydroxides and zinc borate

Preparation and Properties of Epoxided Hydroxyl-terminated Polybutadiene Based Polyurethane Elastomers

Effect of prepared barium phytate on thermal stability and combustion properties of flexible polyurethane foams

Fabrication of flexible polyurethane/phosphorus interpenetrating polymer network (IPN) foam for enhanced thermal stability, flame retardancy and mechanical properties

Effect of Aluminum Diethylphosphinate on the Thermal Stability and Flame Retardancy of Flexible Polyurethane Foams

Study on the thermal stability and flame retardancy of nanocarbon black based layer-by-layer self-assembled coating modified flexible polyurethane foam

Fabrication and Performance Investigation of Flame Retardant Flexible Polyurethane Composites via Polyethyleneimine/Phytic Acid LBL Self‐Assembly Coatings

Thermal stability and combustion properties of polyurethane foam modified with manganese phytate and expandable graphite

Effect of Fully Biobased Coatings Constructed Via Layer-by-Layer Assembly of Chitosan and Lignosulfonate on the Thermal, Flame Retardant, and Mechanical Properties of Flexible Polyurethane Foam

Layered double hydroxide-decorated flexible polyurethane foam: significantly improved toxic effluent elimination

Effects of high functionality polyol on the structure and properties of rigid polyurethane foam

Structural characterization, thermal and mechanical properties of polyurethane/CoAl layered double hydroxide nanocomposites prepared via in situ polymerization

Preparation and properties of novel poly(propylene oxide)-block- polylactide-based polyurethane foams

Preparation and Modification of Flexible Polyurethane Foam for Effective Flame Resistance and Sound Absorption

Thermal Degradation Characteristics of Rigid Polyurethane Foam and the Volatile Products Analysis with TG-FTIR-MS

Thermal decomposition of flexible polyurethane foam under nitrogen and air atmospheres: Thermogravimetric analysis by ETp method

Hierarchical Ti3C2Tx@BPA@PCL for flexible polyurethane foam capable of anti-compression, self-extinguishing and flame-retardant

Fabrication and characterization of flame‐retardant and smoke‐suppressant of flexible polyurethane foam with modified hydrotalcite

Flexible polyurethane foams surface-modified with FeOOH for improved oil-water separation and flame retardancy

A novel and effective method to fabricate flame retardant and smoke suppressed flexible polyurethane foam

Study on flame retardant properties and thermal stability of synergistically modified polyurethane foam with ammonium polyphosphate and barium phytate