Abstract:A liquid-phosphorus-containing polyester diol, PPE, was prepared via condensation polymerization using commercial reactive flame retardant 9,10-dihydro-10-[2,3-di(hydroxycarbonyl)propyl]-10-phospha-phenanthrene-10-oxide, adipic acid, ethylene glycol, and 1,4-butanediol. PPE and/or expandable graphite (EG) were then incorporated into phosphorus-containing flame-retardant polyester-based flexible polyurethane foams (P-FPUFs). The structure and properties of the resultant P-FPUFs were characterized using scanning electron microscopy tensile measurements, limiting oxygen index (LOI), vertical burning tests, cone calorimeter tests, thermogravimetric analysis coupled with Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, and Raman spectroscopy. Unlike the FPUF prepared using regular polyester polyol (R-FPUF), PPE increased the flexibility and elongation at break of the resultant forms. More importantly, the peak heat release rate (PHRR) and total heat release (THR) of P-FPUF were reduced by 18.6% and 16.3%, respectively, via gas-phase-dominated flame-retardant mechanisms, compared with those of R-FPUF. The addition of EG further reduced the peak smoke production release (PSR) and total smoke production (TSP) of the resultant FPUFs while increasing the LOI and char formation. Interestingly, it was observed that EG noticeably improved the residual quantity of phosphorus in the char residue. When the EG loading was 15 phr, the resulting FPUF (P-FPUF/15EG) attained a high LOI value (29.2%) and exhibited good anti-dripping performance. Meanwhile, the PHRR, THR, and TSP of P-FPUF/15EG were significantly decreased by 82.7%, 40.3%, and 83.4%, respectively, compared with those of P-FPUF. This superior flame-retardant performance can be attributed to the combination of the bi-phase flame-retardant behavior of PPE and condensed-phase flame-retardant characteristics of EG.

Fabrication and characterization of flame‐retardant and smoke‐suppressant of flexible polyurethane foam with modified hydrotalcite

A novel and effective method to fabricate flame retardant and smoke suppressed flexible polyurethane foam

Fabrication of flame-retardant and smoke-suppressant rigid polyurethane foam modified by hydrolyzed keratin

The effect of flame retardant additives on the combustion performance of flexible polyurethane foam

Effects of hydrotalcite on rigid polyurethane foam composites containing a fire retarding agent: compressive stress, combustion resistance, sound absorption, and electromagnetic shielding effectiveness

Enhanced flame‐retardant performance of rigid polyurethane foam by using APTES‐MMT and ATH mixed intumescent coatings

Functionalizing Ti3C2Tx for enhancing fire resistance and reducing toxic gases of flexible polyurethane foam composites with reinforced mechanical properties

Hierarchical Ti3C2Tx@BPA@PCL for flexible polyurethane foam capable of anti-compression, self-extinguishing and flame-retardant

A fully bio-based coating made from alginate, chitosan and hydroxyapatite for protecting flexible polyurethane foam from fire

Flame-Retardant and Smoke-Suppressant Flexible Polyurethane Foams Based on Phosphorus-Containing Polyester Diols and Expandable Graphite

Layered double hydroxide-decorated flexible polyurethane foam: significantly improved toxic effluent elimination

Flame retardant and smoke-suppressant rigid polyurethane foam based on sodium alginate and aluminum diethylphosphite

Flame-retardant Nanocoating Towards High-Efficiency Suppression of Smoke and Toxic Gases for Polymer Foam

Aluminum Hypophosphite in Combination with Expandable Graphite As A Novel Flame Retardant System for Rigid Polyurethane Foams

Flame-retardant and Smoke-Suppressant Flexible Polyurethane Foams Based on Reactive Phosphorus-Containing Polyol and Expandable Graphite.

A novel halogen-free flame-retardant flexible polyurethane foam: Thermal, flame-retardant and mechanical properties

Effect of prepared barium phytate on thermal stability and combustion properties of flexible polyurethane foams

Thermal stability and combustion properties of polyurethane foam modified with manganese phytate and expandable graphite

Enhancing the Fire Safety and Smoke Safety of Bio–Based Rigid Polyurethane Foam Via Inserting a Reactive Flame Retardant Containing P@N and Blending Silica Aerogel Powder

Flexible polyurethane foams surface-modified with FeOOH for improved oil-water separation and flame retardancy

Fabrication of flexible polyurethane/phosphorus interpenetrating polymer network (IPN) foam for enhanced thermal stability, flame retardancy and mechanical properties