MXene/chitosan Nanocoating for Flexible Polyurethane Foam Towards Remarkable Fire Hazards Reductions.
Bo Lin,Anthony Chun Yin Yuen,Ao Li,Yang Zhang,Timothy Bo Yuan Chen,Bin Yu,Eric Wai Ming Lee,Shuhua Peng,Wei Yang,Hong-Dian Lu,Qing Nian Chan,Guan Heng Yeoh,Chun H. Wang
DOI: https://doi.org/10.1016/j.jhazmat.2019.120952
IF: 13.6
2020-01-01
Journal of Hazardous Materials
Abstract:MXene/chitosan nanocoating for flexible polyurethane foam (PUF) was prepared via layer-by-layer (LbL) approach. MXene (Ti3C2) ultra-thin nanosheets were obtained through etching process of Ti3AlC2 followed by exfoliation. The deposition of MXene/chitosan nanocoating was conducted by alternatingly immersing the PUF into a chitosan solution and a Ti3C2 aqueous dispersion, which resulted in different number of bilayers (BL) ranging from 2, 5 and 8. Owing to the utilization of ultra-thin Ti3C2 nanosheets, the weight gain was only 6.9% for 8 BL coating of PUF, which minimised the unfavourable impact on the intrinsic properties of PUF. The Ti3C2/chitosan coating significantly reduced the flammability and smoke releases of PUF. Compared with unmodified PUF, the 8 BL coating reduced the peak heat release rate by 57.2%, alongside with a 65.5% reduction in the total heat release. The 8 BL coating also showed outstanding smoke suppression ability with total smoke release decreased by 71.1% and peak smoke production rate reduced by 60.3%, respectively. The peak production of CO and CO2 gases also decreased by 70.8% and 68.6%, respectively. Furthermore, an outstanding char formation performance of 37.2 wt.% residue was obtained for 8 BL coated PUF, indicating the excellent barrier and carbonization property of the hybrid coating.