Abstract:Magnesium matrix composite reinforced with SiC nanoparticles (n-SiCp,/AZ91D) was fabricated by squeeze casting. The microstructure and mechanical properties of the nanocomposite at as-cast state (F), solid solution state (T4) and artificial aging state (T6) were investigated by optical microscopy, X-ray diffraction, scanning electronic microscopy (SEM) and tensile tests. The results show that the solid solution treatment can dissolve the beta-Mg17Al12 eutectic phase in the matrix of n-SiCl,/AZ91D composites to produce single supersaturated solid solution alpha-Mg phase and the ultimate tensile strength and elongation are significantly improved which can be up to 265 MPa and 13.7%, respectively. After aging treatment, the ultimate tensile strength and yield strength of the nanocomposite are further improved, which is 275 MPa and 145 MPa, respectively. SEM results show that the beta-Mg17Al12 phase is mainly precipitated in grain and at grain boundary as continuous or non continuous forms. In particular SiC nanoparticles have an important effect on the morphology, size and distribution of the beta-Mg17A112 precipitation phase and they result in the fine and uniformly dispersed secondary precipitate phase to be formed, which gives full play to the secondary precipitation strengthening effect. Finally, the fracture morphology of n-SiCl,/AZ91D composites at different heat treatment conditions were observed by SEM and the fracture behavior were analyzed and discussed.

Mechanical Properties of n-SiCp/AZ91D Magnesium Matrix Composites at Elevated Temperature

Tensile properties and fracture behavior of nano-sized SiC particles reinforced AZ91D composites at elevated temperature

Microstructure and Elevated Tensile Properties of Submicron SiCp/AZ91 Magnesium Matrix Composite

Wear behavior of magnesium matrix nanocomposites at room and elevated temperature

Microstructure and room temperature tensile properties of 1 μm-SiCp/AZ31B magnesium matrix composite

Effect of Heat Treatment on Microstructure and Mechanical Properties of Squeeze Cast n SiCp/AZ91D Magnesium Matrix Composites

Preparation and properties of nano-sized SiC particles reinforced AZ91D magnesium matrix composites

High-Modulus Laminated SiC/AZ91 Material with Adjustable Microstructure and Mechanical Properties Based on the Adjustment of the Densities of the Ceramic Layers

Tensile Mechanical Behavior and Failure Mechanism of a Plain-Woven SiCf/SiC Composites at Room and Elevated Temperatures

Mechanical Properties and Microstrutures of Nano-Sized Sic Particles Reinforced Az91d Nanocomposites Fabricated by High Intensity Ultrasonic Assisted Casting

Nano-particle Reinforced Magnesium Matrix Composites

Microstructures, Interface Structure and Room Temperature Tensile Properties of Magnesium Materials Reinforced by High Content Submicron SiCp

Effect of SiC Particles and the Particulate Size on the Hot Deformation and Processing Map of AZ91 Magnesium Matrix Composites

Hot Deformation Behavior of Sicp/Az91 Magnesium Matrix Composite Fabricated by Stir Casting

Effect of Hot Extrusion on Microstructures and Mechanical Properties of SiC Nanoparticles Reinforced Magnesium Matrix Composite

Microstructure evolution mechanism of micron particle reinforced magnesium matrix composite at room temperature

Microstructure Evolution and Mechanical Properties of a Particulate Reinforced Magnesium Matrix Composites Forged at Elevated Temperatures

Effect of ECAP on the Microstructure and Tensile Property of SiCp/AZ91 Magnesium Matrix Composite

Effect of Submicron Size SiC Particulates on Microstructure and Mechanical Properties of AZ91 Magnesium Matrix Composites

Mechanical properties and microstructure evolution of 3D C f /SiBCN composites at elevated temperatures

High-temperature tensile behavior of 3D SiC/SiC composites