Abstract:A new dual-imaging-unit atomic force microscope (DIU-AFM) was developed for wide-range length metrology. In the DIU-AFM, two AFM units were combined, one as a reference unit, and the other a test one. Their probes with Z piezo elements and tips were horizontally set in parallel at the same height to reduce errors due to geometric asymmetry. An XY scanner was attached to an XY block that was able to move in the X direction with a step of about 500 nm. A standard porous alumina film was employed as the reference sample. Both reference sample and test sample were installed at the center of the AT scanner on the same surface and were simultaneously imaged. The two images had the same lateral size, and thus the length of the test sample image could be accurately measured by counting the number of periodic features of the reference one. The XY block together with the XY scanner were next moved in the X direction for about 1.5 mum and a second pair of reference and test images were obtained by activating the scanner. In this way, a series of pairs of images were acquired and could be spliced into two wide-range reference and test images, respectively. Again, the two spliced images were of the same size and the length of test image was measured based on the reference one. This article presents a discussion about the structure and control of the DIU-AFM system. Some experiments were carried out on the system to demonstrate the method of length calculation and measurement. Experiments show a satisfactory result of wide-range length metrology based on the hexagonal features of the porous alumina with a periodic length of several tens of nanometers. Using this method the DIU-AFM is capable of realizing nanometer-order accuracy length metrology when covering a wide range from micron to several hundreds of microns, or even up to millimeter order. (C) 2004 Wiley-Liss, Inc.

Microstructure Measurement Method of Novel Multi-Level Run-Limited-Length Read Only Discs Using the Atomic Force Microscope

Measurement Mark Profiles of Digital Versatile Disc and Multilevel Read-Only Disc with Atomic Force Microscopy

Surface Profile Measurement of Micro-Optics by Using a Long Stroke Atomic Force Microscope

Applications Of Afm Technology In Cd-R R&D

Applications of AFM Technology in CD-R Research and Development

Modeling and Realization of a Multilevel Read-Only Disk

Simulation analysis and experimental validation of a new multi-level read-only optical recording method

Theoretical and Experimental Analyses of Recording Mark Microstructures in Signal Waveform Modulation Optical Disc

Multilevel Optical Data Recording Methods on Phase-Change Media

Measurement of Sub-Surface Microstructures Based on a Developed Ultrasonic Atomic Force Microscopy

Multilevel Read-Only Optical Recording Methods

Approximated Vector Diffraction Theory for Readout Signal of Multi-Level Run-Length-Limited Discs

Modeling and process of mastering for multi-level run-length-limited optical discs

Study of Multi-Level Run-Length Limited Photo-Chromic Storage

Study of the Multi-Level Reflection Modulation Recording for Phase Change Optical Disks

Dynamic Model of Mastering for Multilevel Run-Length Limited Read-Only Disc

A Novel Atomic Force Microscope with High Stability and Scan Speed

On-machine Measurement of a Slow Slide Servo Diamond-Machined 3D Microstructure with a Curved Substrate

Optical and Magneto‐optical Characterization for Multi‐dimensional Multi‐level Optical Recording Material

Wide-range length metrology by dual-imaging-unit atomic force microscope based on porous alumina.

Pit Depth and Width Modulation Multilevel Run-Length Limited Read-Only Optical Storage