Abstract:The Super Tau-Charm Facility (STCF) is a high-luminosity electron-positron collider proposed in China. It will operate in the energy region of 2-7 GeV with a peak luminosity of at least 0.5 x 1035 cm-2 s-1, providing an excellent platform for studying the tau-charm physics. The STCF detector includes an electromagnetic calorimeter (EMC), which plays a crucial role in the accurate measurement of photon energy. To address the challenge of achieving superior photon energy resolution in the high-rate environment caused by the high luminosity, a fast-response EMC based on pure CsI crystals is proposed for the STCF experiment. In this paper, we present the conceptual design of a pure CsI EMC for STCF. The light yield of a pure CsI unit designed for the STCF EMC was measured using cosmic rays. Without considering the mechanical structures of the EMC and the sub-detectors in front of the EMC, the performance of the pure CsI based EMC was studied through Geant4 simulations incorporating the measured light yield, and the EMC design was optimized based on the results. The simulation was carried out under the condition of 100 p.e./MeV light yield and the high background environment anticipated in the STCF experiment. By employing a waveform fitting method, an energy resolution of better than 2.5% for 1 GeV photons was achieved, which satisfies the major performance requirement for the STCF EMC. However, validation studies should be conducted, including the contribution of different types of experimental backgrounds and the accuracy of the background counting rate.

Design and assembly of the CsI(Tl) crystal module of the BESIII electro-magnetic calorimeter

Design And Assembly Of The Csi(T1) Crystal Module Of The Besiii Electro-Magnetic Calorimeter

The radiation hardness test on CsI(Tl) crystals for BESIII

Cosmic Ray Test On Csi(Tl) Modules Of Besii Electromagnetic Calorimeter

Time Information Study of CsI(Tl) Crystal Calorimeter of BESIII

Monte Carlo Simulation of CsI(Tl) Scintillator Detector with GEANT4 ToolKit

Simulation Study of the Electromagnetic Calorimeter Triggers in Bes Iii

Pure CsI electromagnetic calorimeter design for the Super Tau-Charm Facility

Design of Readout Electronics for BESIII Crystal Calorimeter Integrated Dose Monitoring System

Nuclear Counter Effect of Silicon Photodiode Used in Csi(Tl) Crystal Calorimeter

The Readout Electronics Research Design and Development for CEPC Scintillators Electromagnetic Calorimeter Prototype

Cosmic Ray Test of Shashlik Electromagnetic Calorimeter Modules for NICA-MPD

Energy Loss Correction for A Crystal Calorimeter

Simulation Studies of the Beam Monitor for the CSR External-Target Experiment

Two annular CsI(Tl) detector arrays for the charged particle telescopes

Quality Assurance on Un-Doped CsI Crystals for the Mu2e Experiment

Production and Quality Control of NICA-MPD Shashlik Electromagnetic Calorimeter in Tsinghua University

Beam test of CSES silicon strip detector module

Design of the Online Integral Dose Monitor System for Besiii Emc

A Simulation Study of the BESⅢ TOF Test-Beam

Design and performance testing of a T0 detector for the CSR External-target Experiment