Abstract:The CBM experiment is a fixed-target heavy-ion physics experiment at the future FAIR facility, designed to explore the QCD phase diagram at high baryon-net densities and moderate temperatures. To address its complex physics program, the experiment is conceived to operate at beam–target interaction rates up to 10 MHz with self-triggered front-end electronics and free-streaming readout architecture. The Silicon Tracking System (STS) of CBM is the main charged-particle tracker, capable of delivering time-stamped hits for online tracking and event building, and momentum measurement inside a superconducting dipole magnet. The functional unit of the STS is the detector module, a device assembled from a double-sided silicon microstrip sensor connected via a stack of microcables to a pair of front-end boards carrying the readout electronics. The assembly and successful operation of STS modules, produced with close-to-final components, was an important milestone achieved in recent years. The systematic study of the modules’ performance is also necessary for optimizing the assembly procedure and ensuring high production yield. This work reports a series of tests, which aim to evaluate the module’s operation and establish the basic criteria for quality control. It summarizes the procedures and results of different measurements performed with the modules, starting with noise estimation and charge amplitude calibration, resulting in the linearization of the channel’s ADC and a homogeneous threshold distribution. Those results were verified using a radioactive source. Additionally, first conclusions concerning the assembly yield in terms of number of functional channels were obtained. These studies represent a fundamental step towards the series production readiness for the final STS detector.

Beam test of CSES silicon strip detector module

Beam Test of a Monolithic Active Pixel Sensor for the CEPC Vertex Detector

Beam Test of the PIN-diode Readout Units with Electron Energies from 5 to 40 GeV at CERN SPS

Quality Assurance Test of Silicon Photomultipliers and Electronic Boards for STAR Event Plane Detector

Track Recognition for the $ΔE-E$ Telescopes with Silicon Strip Detectors

Cosmic Ray Test On Csi(Tl) Modules Of Besii Electromagnetic Calorimeter

Beam test of a baseline vertex detector prototype for CEPC

Investigation of the Thickness Non-Uniformity of the Very Thin Silicon-Strip Detectors

High-precision CSNS Beam Monitor System Conceptual Design Based on SiC

Beam Test Results of the US-CMS Forward Pixel Detector

Beam Test Results of Two Shashlyk ECal Modules for NICA-MPD

Study of SiPM for CEPC-AHCAL

Study of CMOS Strip Sensor for Future Silicon Tracker

SiC Based Beam Monitoring System for Particle Rates from kHz to GHz

Scintillator Tile Batch Test of CEPC AHCAL

Beam Tests of Lead Tungstate Crystal Matrices and A Silicon Strip Preshower Detector for the Cms Electromagnetic Calorimeter

High precision proton beam monitor system concept design on CSNS based on SiC

207 Bi Radioactive Source Tests of Silicon Detectors Based on VA140

Functional characterization of modules for the Silicon Tracking System of the CBM experiment

Test of Double-sided Multi-strip Silicon Detectors

Two annular CsI(Tl) detector arrays for the charged particle telescopes