Abstract:Porous zinc oxide (ZnO) nanosheet (NS) arrays constructed by connected nanocrystallites were built on weaved metal wire (WMW) via hydrothermal treatment followed by calcination, and used as photoanodes for flexible dye-sensitized solar cells (DSSCs). An overall light-to-electricity conversion efficiency (h) of 2.70% was achieved for the DSSC under 100 mW cm(-2) illumination, and this h was found to be much higher than that of the DSSC with ZnO nanowire (NW) as the photoanode (0.71%). The far superior performance of the DSSC with ZnO-NS is essentially attributed to: (i) the film consisting of nanosheets with interconnected nanocrystallites can allow relatively direct pathways for the transportation of electrons as the nanosheets have a regular structure with the sheets being oriented to the electrode; (ii) the nanocrystallites assembly and porous character of the nanosheets can provide a large surface area for dye adsorption, which is in favor of enhancing the light absorption and the light propagation; (iii) the nanopores embedded in the nanosheet can act as "branch lines" for more efficient electrolyte diffusion into the interstice of the densely packed nanosheets in the array. A further improvement in the efficiency of the DSSC with ZnO-NS was achieved through the atomic layer deposition (ALD) of an ultrathin titanium oxide (TiO2) layer onto the ZnO-NS layer. The larger charge transfer resistance along with the introduction of a TiO2 shell is thought to reduce the surface recombination and thus contribute to the increase in the open circuit voltage (V-oc) of the DSCs and higher conversion efficiency (3.09%).

Facile Synthesis of Zno Nanowires on Fto Glass for Dye-Sensitized Solar Cells

Controlled Growth of ZnO Nanowire with Application to Dye-Sensitized Solar Cells

Synthesis of ZnO@TiO2 Core–shell Long Nanowire Arrays and Their Application on Dye-Sensitized Solar Cells

ZnO nanotube-based dye-sensitized solar cell and its application in self-powered devices.

Facile Construction of Nanofibrous Zno Photoelectrode for Dye-Sensitized Solar Cell Applications

Ultralong Porous ZnO Nanobelt Arrays Grown Directly on Fluorine-Doped SnO2 Substrate for Dye-Sensitized Solar Cells

Ultra-fast microwave-assisted hydrothermal synthesis of long vertically aligned ZnO nanowires for dye-sensitized solar cell application

Fabrication of Zno Nanowire Arrays by Cycle Growth in Surfactantless Aqueous Solution and Their Applications on Dye-Sensitized Solar Cells

Synthesis of Zno Nanostructure Films by Thermal Evaporation Approach and Their Application in Dye-Sensitized Solar Cells

Controlled Synthesis of Aligned ZnO Nanowires and the Application in CdSe-sensitized Solar Cells

The Effect of Growth Conditions on the Properties of ZnO Nanorod Dye-Sensitized Solar Cells

A Facile Self-assembly Synthesis of Hexagonal ZnO Nanosheet Films and Their Photoelectrochemical Properties

Growth of ZnO/TiO2 Nanostructured Composite Films and Its Application in Dye-Sensitized Solar Cells

Controllable growth of dendritic ZnO nanowire arrays on a stainless steel mesh towards the fabrication of large area, flexible dye-sensitized solar cells.

Cathodic Electrodeposition of Nanocrystalline ZnO Films for Dye-Sensitized Solar Cell Applications

Porous ZnO Nanosheet Arrays Constructed on Weaved Metal Wire for Flexible Dye-Sensitized Solar Cells.

Vertically Building Zn2SnO4 Nanowire Arrays on Stainless Steel Mesh Toward Fabrication of Large-Area, Flexible Dye-Sensitized Solar Cells.

One-step large-scale synthesis of porous ZnO nanofibers and their application in dye-sensitized solar cells

In-situ solvothermal growth of Zn2SnO4 films on FTO glass towards superior dye-sensitized solar cells

Preparation of microstructured ZnO nanorod photoelectrode

Fabrication of dye-sensitized solar cells with ZnO nanorods as photoanode and natural dye extract as sensitizer