Abstract:(Cu50Zr50)(x)(Cu73Ti27)(100-x) (x = 0.63-0.75 at.%) alloys are designed using the proportional mixing of Cu(50)Zr(50 )and Cu73Ti27 binary alloys. Their thermal, mechanical and corrosive properties as well as the glass forming ability (GFA) are systematically investigated. The results show that the studied Cu-based glass forming alloys are bulk metallic glass composites (BMGCs) with off-eutectic compositions and display work-hardening behavior. The glass transition temperature and the reduced glass transition temperature increase and then decrease with increasing x when x >= 0.74 atop, while on the contrary for the critical cooling rate and supercooled liquid region. Both yield strength and fracture strength firstly increase and then decrease with decreasing x when x <= 0.71 at%. The plastic strain of (Cu50Zr50)(0.)(75)(Cu73Ti27)(0.)(25) BMGC is the largest among the studied Cu-based BMGCs. Potentiodynamic polarization measurements show that all studied BMGCs exhibit a step-like anodic polarization behavior, indicating two competitive procedures of pitting corrosion and self-passivization. The corrosion behavior gradually transforms from predominant self-passivization to the pitting corrosion with decreasing x. Both corrosion current density and onset passive current density of (Cu50Zr50)(0.)(75)(Cu73Ti27)(0.)(25) BMGCs are two orders of magnitude lower than those of the other Cu-based BMGCs. The mechanisms for the GFA and the corrosion are also discussed. The present work would shed light on how to design and develop BMGCs with superior comprehensive performances.

Effects of Mg Content and Cooling Rate on Microstructure and Corrosion Behavior of Mg-Cu-Zn-Y Bulk Metallic Glass Composites

Effect of Cooling Rate and Composition on Microstructures and Properties of Zn-Mg Alloys

Effects of Cooling Rate on Microstructure, Mechanical and Corrosion Properties of Mg–Zn–Ca Alloy

Microstructure and mechanical properties of Mg-Cu-Y-Zn bulk metallic glass matrix composites prepared in low vacuum

Enhanced Mechanical Properties and Corrosion Resistance of a Mg–Zn–Ca Bulk Metallic Glass Composite by Fe Particle Addition

Microstructure, Mechanical and Bio-Corrosion Properties of Mn-Doped Mg-Zn-Ca Bulk Metallic Glass Composites

Microstructures and Tensile Properties of CuZrAlNb Metallic Glass Composites under Different Cooling Rates

Effects of cooling rate on microstructure and property of Mg-1 Ca alloy

Effect of Cu on Glass Forming Ability and Mechanical Properties of Mg-Zn-Ca Alloys

Formation and Mechanical Properties of Mg-Cu-Al-Gd Bulk Metallic Glass Composites

Effect of Cooling Rates and Zr Addition on the Microstructure and Corrosion Behaviors of the Mg–Zn–Gd Alloys

Effect of Grain Size and Volume Fraction of Eutectic Structure on Mechanical Properties and Corrosion Behavior of As-Cast Zn–Mg Binary Alloys

Microstructure evolution and mechanical properties of Cu46Zr47Al7 bulk metallic glass composite containing CuZr crystallizing phases

Mechanical and corrosion properties of Ti-Ni-Cu-Zr metallic glass matrix composites

Effect of Cooling Rate on Solidification Structure of Zinc-Aluminum-Magnesium Alloy

Effect of Oxygen Content on the Microstructure, Compression Properties and Work-Hardening Behaviors of ZrCuAlNi Glassy Composites

Effects of Water-Cooling on Quasicrystal Formation of As-Cast Mg-Zn-Zr-Y Alloys and the Microstructure

Thermal Stability, Glass-Forming Ability and Mechanical Properties of Mg-Y-Zn-Cu Glassy Alloys

The Effect of Cooling Rate on the Microstructure and Mechanical Properties of Mg–Zn–Gd-based Alloys

Composition Design and Properties of Cu–Zr–Ti Bulk Metallic Glass Composites

Effects of Mg content on microstructure and mechanical properties of low Zn-containing Al−xMg−3Zn−1Cu cast alloys