Abstract:Titanium carbides attract attention from both academic and industry fields because of their intriguing mechanical properties and proven potential as appealing candidates in the variety of fields such as nanomechanics, nanoelectronics, energy storage and oil/water separation devices. A recent study revealed that the presence of Ti8C5 not only improves the impact strength of composites as coatings, but also possesses significant strengthening performance as an interlayer material in composites by forming strong bonding between different matrices, which sheds light on the design of impact protection composite materials. To further investigate the impact resistance and strengthening mechanism of Ti8C5, a pilot Molecular Dynamics (MD) study utilizing comb3 potential is carried out on a Ti8C5 nanosheet by subjecting it to hypervelocity impacts. The deformation behaviour of Ti8C5 and the related impact resist mechanisms are assessed in this research. At a low impact velocity ~0.5 km/s, the main resonance frequency of Ti8C5 is 11.9 GHz and its low Q factor (111.9) indicates a decent energy damping capability, which would eliminate the received energy in an interfacial reflection process and weaken the shock waves for Ti8C5 strengthened composites. As the impact velocity increases above the threshold of 1.8 km/s, Ti8C5 demonstrates brittle behaviour, which is signified by its insignificant out-of-plane deformation prior to crack initiation. When tracking atomic Von Mises stress distribution, the elastic wave propagation velocity of Ti8C5 is calculated to be 5.34 and 5.90 km/s for X and Y directions, respectively. These figures are inferior compared with graphene and copper, which indicate slower energy delocalization rates and thus less energy dissipation via deformation is expected prior to bond break. However, because of its relatively small mass density comparing with copper, Ti8C5 presents superior specific penetration. This study provides a fundamental understanding of the deformation and penetration mechanisms of titanium carbide nanosheets under impact, which is crucial in order to facilitate emerging impact protection applications for titanium carbide-related composites.

Thermal Shock Resistance of TiB2–Cu Interpenetrating Phase Composites

Microstructural analysis of the thermal fatigue tested Be/CuCrZr joint with artificial defects between Ti/Cu interlayers

High Temperature Tensile Properties of in Situ TiBw/Ti6Al4V Composites with a Novel Network Reinforcement Architecture

Effect of TiB_2 content on microstructure and mechanical properties of in-situ fabricated TiB_2/B_4C composites

Atomistic Investigation of Titanium Carbide Ti8C5 under Impact Loading

Thermal Ablation Resistance of Melt-Infiltrated Titanium Diboride-(Copper, Nickel) Composites

Mechanical properties and thermal shock resistance of TiB2‒B4C composite ceramic tool materials at microscopic scale

Microstructure Evolutions of the W–TiC Composite Conducted by Dual-Effects from Thermal Shock and He-ion Irradiation

The Process of TiB 2 −cu Composite Phase and Structure Formation During Combustion Synthesis

Transient plastic phase processing of titanium-boron-carbon composites

Planar shock compression of spark plasma sintered B4C and B4C–TiB2 ceramic composites

Numerical evaluation and experimental verification of mechanical properties and fracture behavior for TiB2/Cu composites prepared by in-situ mixing casting

Densification behavior, mechanical and electrical properties of in-situ TiB 2p /Cu composite powder via vacuum hot pressing

Effect of Copper Content on the Microstructures and Properties of Tib2 Based Cermets by Shs

Combustion synthesis TiC-Al2O3/Fe FGM and its resisting thermal shock behaviors

Combustion Synthesis TiC-A12O3/Fe FGM and its Resisting Thermal Shock Behaviors

TiB₂-Based Composites for Ultra-High-Temperature Devices, Fabricated by SHS, Combining Strong and Weak Exothermic Reactions

A new high-temperature, oxidation-resistant in situ TiB and TiC reinforced Ti6242 alloy

Experimental and first-principles study on TiB/TiC interface in hybrid (TiB+TiC)/Ti6Al4V composite

Microstructure and Transient Laser Thermal Shock Behavior of W–TiC–Y2O3 Composites Prepared by Wet Chemical Method

Effect mechanism of mono-particles or hybrid-particles on the thermophysical characteristics and mechanical properties of Cu matrix composites