Abstract:In order to study the influences of confining pressure and strain rate on the mechanical properties of the Nitrate Ester Plasticized Polyether (NEPE) propellant, uniaxial tensile tests were conducted using the self-made confining pressure system and material testing machine. The stress-strain responses of the NEPE propellant under different confining pressure conditions and strain rates were obtained and analyzed. The results show that confining pressure and strain rate have a remarkably influence on the mechanical responses of the NEPE propellant. As confining pressure increases (from 0 to 5.4 MPa), the maximum tensile stress and ultimate strain increase gradually. With the coupled effects of confining pressure and strain rate, the value of the maximum tensile stress and ultimate strain at 5.4 MPa and 0.0667 s<sup>-1</sup> is 2.03 times and 2.19 times of their values under 0 MPa and 0.00333 s<sup>-1</sup>, respectively. Afterwards, the influence mechanism of confining pressure on the NEPE propellant was analyzed. Finally, based on the viscoelastic theory and continuous damage theory, a nonlinear constitutive model considering confining pressure and strain rate was developed. The damage was considered to be rate-dependent and pressure-dependent. The constitutive model was validated by comparing experimental data with predictions of the constitutive model. The whole maximum stress errors of the model predictions are lower than 4% and the strain errors are lower than 7%. The results show that confining pressure can suppress the damage initiation and evolution of the NEPE propellant and the nonlinear constitutive model can describe the mechanical responses of the NEPE propellant under various confining pressure conditions and strain rates. This research can lay a theoretical foundation for analyzing the structural integrity of propellant grain accurately under working pressure loading.

Deformation analysis of free loading propellant in storage

Deformation Characteristics of Inherently Anisotropic Granular Media under Repeated Traffic Loading: a DEM Study

Research on the Safety of Long Term Storage Solid Rocket Motor with Debonded Layer

Structural Integrity Assessment of a Solid Propellant Grain Considering Confining Pressure Effect

Research on the influences of confining pressure and strain rate on NEPE propellant: Experimental assessment and constitutive model

Experimental Research on Tensile Mechanical Properties of NEPE Propellant under Confining Pressure

Experimental Investigation on the Influence of Confining Pressure on Thermal Aged CMDB Propellant

Study on Mechanical Properties of Solid Propellant NEPE

Study on the Viscoelastic Damage Properties of NEPE Solid Propellant with Different Cyclic Stress Ratios

Damage characteristics and failure mechanism analysis of NEPE propellant at high strain rates

A constitutive model of solid propellants considering aging and confinement pressure

A Nonlinear Viscoelastic Constitutive Model for Solid Propellant with Rate-Dependent Cumulative Damage

Permanent Deformation Characteristics of Saturated Sand under Cyclic Loading

Finite Element Analysis of Adhesive Failure of Solid Composite Propellant Multi-material Structure for Underwater Intelligent Equipment

Mechanical Behaviors and Constitutive Relations under wide strain rate range for CMDB propellant

Numerical Simulation on the Interface Debonding in Solid Propellant under Large Deformation by a Cohesive Zone Model

Experimental Investigation and Modeling the Compressive Behavior of NEPE Propellant under Confining Pressure

Long‐Term Creep Prediction of NEPE Propellant Based on SSM Method

Degradation Laws and Characteristic Parameters of Performance of Gun Propellant in Storage

Study on Dynamic Impact and Ignition Response Behavior of GAP/PET/RDX Based Propellant

NEPE Propellant Mesoscopic Modeling and Damage Mechanism Study Based on Inversion Algorithm