Abstract:Commonly, the shear piezoelectric constant value for d15 is almost two times higher than those for d33 and d31. Also the value of share electro-mechanical coupling coefficient k15 is higher than those of k31 and k33. Sometimes a design for ultrasonic motor based on share coefficients d15 has the potential for superior performance. In the paper, we propose a new mechanism for exciting shear-bending vibration in piezoelectric ceramic rod. A solid piezoelectric ceramic rod is polarized along its axial direction. The surface of the cylindrical rod used as an electrode is plated with nickel. The cylindrical electrode was divided into four pairs and each pair has two parts symmetrically along the axes. If opposite voltage signals are applied to the electrode parts which are opposite on circumferential direction or along the axial direction, a shearing strain should be induced on the piezoelectric ceramic. Using a pair of alternating voltage signals (sine and cosine) on four pairs of electrodes, a shaking head vibration (wobbling motion) was generated circumferentially. A mini-ultrasonic motor prototype with this concept and a diameter of 6mm was designed. And its characteristics were determined experimentally. The design concept presented in this paper is much promising for applications in small motors, especially in those with piezoelectric ceramic rod stators with a large diameter-length ratio.

Study on the Conversion Mechanism of Radial-Torsional Vibration Mode of Piezoelectric Hybrid Disk with Multiple Diagonal Slots

Radial vibration of piezoelectric/magnetostrictive composite hollow sphere

Analysis of Longitudinal and Torsional Resonance Vibrations of a Piezoelectrically Excited Bar by Introducing Piezoelectric Loss Coefficients

Study on Vibro-Acoustics of Polyphase, Fractional Slot, Surface Mounted Permanent Magnet Disc Machines

The Modeling of a Piezoelectric Transformer Using a Transverse Vibration

A MINIATURE HIGH-SPEED PIEZOELECTIRC MOTOR WITH A DISK-PIVOT STRUCTURE

Resonant Modes of Piezoelectric Disc Structure and Their Application in Micro Ultrasonic Motors

Theoretical analysis of transverse and planar vibrations for the piezoceramic disk based on Mindlin plate theory

Research and application on piezoelectric ceramic component with shear modes for micro-ultrasonic motor

Electromechanical characteristics of discal piezoelectric transducers with spiral interdigitated electrodes

A Novel Rotary Piezoelectric Motor Using First Bending Hybrid Transducers

A New Type of Mode Convert Piezoelectric Drill

Vibration Characteristics of A Discal Piezoelectric Transducer with Spiral Interdigitated Electrodes

Study on the Vibration Couplings of a Traveling Wave Piezoelectric Stator Excited by a Longitudinal and Bending Hybrid Transducer

Modulated Vibration Reduction Design for Integral-Slot Interior Permanent Magnet Synchronous Machines

A Piezoelectric Motor Operated under the Superposition of the Second and Third Bending Modes of A Sandwich Transducer

Design and Experiment of Annular Piezoelectric Ultrasonic Motor with Multi-Frequency Driving

Study on the Exciting Method for Piezoelectric Actuator Using Bending Hybrid Modes

Simulation and Experimental Study of Non-Contact Piezoelectric Micromotor

A miniature disk-pivot piezoelectric motor with double rotors

Vibration Analysis and Characteristics of Ultrasonic Motor Using a Longitudinal-torsional Convertor with Oblique Slots