Abstract:For direct analyses of micro-samples and the hyphenation with nanoflow separation techniques, a low-cost demountable nanoflow nebulizer was fabricated for inductively coupled plasma mass spectrometry (ICPMS). A small-bore capillary (20 mm) with a tapered tip served as the sample capillary of the nebulizer. The gas orifice diameter, the internal diameter and the wall thickness at the tip of the sample capillary were 160, 20, and 5 mm, respectively, which ensured stable generation of aerosol by the nebulizer at nanoflow rates down to 50 nL min(-1) and an ultra-low aspiration rate (80 nL min(-1)). Narrower aerosol size distribution and higher analyte transport efficiency (nearly 100%) were obtained with the proposed nebulizer than with the previous demountable capillary microflow nebulizer. The sensitivity and detection limit of the proposed nebulizer at 500 nL min(-1) were about one third of those obtained by using the demountable capillary microflow nebulizer at 5 mL min(-1), whereas the precision of the former at 500 nL min(-1) was even to some extent superior over that obtained with the latter at 5 mL min(-1). Furthermore, the ICP-MS instrument could tolerate direct introduction of 100% organic solvents by using the developed nebulizer operating at nanoflow rates. It was utilized to sheathless interface nano-high performance liquid chromatography with ICP-MS for arsenic speciation analysis with good accuracy and precision, proving its strong robustness and good suitability.

Study of a Capillary Interface for a Home-made Time-of-flight Mass Spectrometer

Combining A Capillary with A Radio-Frequency-Only Quadrupole As an Interface for A Home-Made Time-Of-Flight Mass Spectrometer

A Homemade High-Resolution Orthogonal-Injection Time-of-flight Mass Spectrometer with a Heated Capillary Inlet

Design of an atmospheric pressure ionization vacuum interface and its application on electrospray ioniza-tion time-of-flight mass spectrometer.

Influence of the Capillary Design and Conditions upon the Transmission Efficiency of a Portable Ion Trap Mass Spectrometer

Design and Performance of a Desktop Time-of-Flight Mass Spectrometer for Analyzing Metal Ions

Design of a Laser Ionization Source and Its Application on Desktop Time-of-Flight Mass Spectrometer

Nanoliter-Scale Etched Capillary Electrospray Interface of Mass Spectrometry

Evaluation of Ion Transport Processes in A Heated Capillary Tube Interface for Electrospray Ionization Time-Of-Flight Mass Spectrometry - Invited Lecture

Experimental and Simulation Investigation of Ion Transfer in Different Sampling Capillaries.

Breaking the pumping speed barrier in mass spectrometry: discontinuous atmospheric pressure interface.

A demountable nanoflow nebulizer for sheathless interfacing nano-high performance liquid chromatography with inductively coupled plasma mass spectrometry

Development and Characterization of LC-MS Interface Technology

Development of High Acquisition Speed Time-of-Flight Mass Spectrometer for Combination with Comprehensive Two-dimensional Gas Chromatography

Atmospheric Pressure Interface for a Handheld Ion Trap Mass Spectrometer: Electrospray Ionization and Desorption Electrospray Ionization

Laser Vaporization/Ionization Interface for Capillary Electrophoresis-Time-of-Flight Mass Spectrometry.

Electron Ionization and Orthogonal Acceleration Time-of-Flight Mass Spectrometer

Development And Performance Of A Miniature Vacuum Ultraviolet Ionization/Orthogonal Acceleration Time Of Flight Mass Spectrometer

Development of portable single photon ionization time-of-flight mass spectrometer combined with membrane inlet

Application of Capillary Introduction Mass Spectrometer to Direct Analysis of Liquid

Development Of A Portable Single Photon Ionization-Photoelectron Ionization Time-Of-Flight Mass Spectrometer