Abstract:Supercritical-pressure light water-cooled reactors (SCWR) are the only water cooled reactor types in Generation IV nuclear energy systems. Startup systems, and their associated startup characteristic analyses, are important components of the SCWR design. To analyze the entire startup system, we propose a wall heat transfer model in a paper, based on the results from a supercritical transient analysis code named SCTRAN developed by Xi'an Jiao tong University. In this work, we propose a new heat transfer mode selection process. Additionally, the most appropriate heat transfer coefficient selection method is chosen from existing state-of-the-art methods. Within the model development section of the work, we solve the problem of discontinuous heat transfer coefficients in the logic transformation step. When the pressure is greater than 19 Mpa, a look-up table method is used to obtain the heat transfer coefficients with the best prediction accuracy across the critical region. Then, we describe a control strategy for the startup process that includes a description of the control objects for coolant flow rate, heat-exchange outlet temperature, system pressure, core thermal power, steam drum water-level and the once-through direct cycle loop inlet temperature. Different control schemes are set-up according to different control objectives of the startup phases. Based on CSR1000 reactor, an analytical model, which includes a circulation loop and once-through direct cycle loop is established, and four startup processes, with control systems, are proposed. The calculation results show that the thermal parameters of the circulation loop and the once-through direct cycle meets all expectations. The maximum cladding surface temperature remains below the limit temperature of 650 degrees C. The feasibility of the startup scheme and the security of the startup process are verified.

Brief Introduction of Calculation Process for Start-up Characteristic of Supercritical Once-through Boiler

A Study of the Water Swell in Supercritical Once through Boilers During Start up

Study on coal combustion characteristics in a 350MW supercritical tangentially boiler

Optimization of Start-up Process in Combined Cycle Steam Turbine of a Power Plant

The Study of Unified Thermal Calculation Model of Circulating Fluidized Bed Boiler Based on Experience

Start Up Simulation Calculation of 600MW Sliding Pressure Operation Supercritical Boiler

Optimization on Start-up Process of Steam Turbine in Combined Cycle Generating Units

Introduction to Simulation Computing Program of Startup Characteristic for 1000 MW Ultra Supercritical Boiler

Modeling and Simulation of the Long-term Dynamic Characteristics of a Supercritical Once-through Boiler

DESIGN AND OPERATION OF SUPERCRITICAL PRESSURE ONCE - THROUGH BOILER START-UP SYSTEM

Startup Thermal Analysis of a Supercritical-Pressure Light Water-Cooled Reactor CSR1000

Study on the Dynamic Characteristics of a 600MW Supercritical Once-Through Boiler

Experimental Investigation of Transient Heat Transfer in the Once-Through Boiler Water Separator

Study on Supercritical Strait Boiler Start-up Systems and Steam Turbine By-pass Systems

Character and Analysis on the start-up system design of Ultra-supercritical Boiler

Study on Calculation Method for Partition of Heat Transfer in an Ultra-supercritical Boiler

Coupled Modeling of Combustion and Heat Transfer Process of a Supercritical CO2 Boiler

Thermal–hydraulic Calculation and Analysis of a 600 MW Supercritical Circulating Fluidized Bed Boiler with Annular Furnace

Experimental test, numerical analysis and thermal calculation modeling of hundreds kW th -class supercritical CO 2 fossil-fired boiler system

Calculation on Flow Rate Distribution and Wall Temperature of Waterwall with Spiral Tube Coils of Supercritical Once-through Boilers

Study on thermal hydraulic characteristics under startup of SCWR