Abstract:The forward-curved multi-blade centrifugal fan is widely used in the ventilation and household appliance industries with limited space due to its small size factor, high pressure coefficient, and large outlet flow coefficient. Conventional centrifugal fan structural designs rely on empirical data, resulting in drawbacks during usage such as low airflow velocity, high noise levels, and high energy consumption. In order to optimize fan structure, enhance aerodynamic performance, and seek new, effective approaches for energy efficiency and emissions reduction, this paper focuses on a combined design method that integrates scroll line design with aerodynamic performance and noise control. The goal is to propose a noise prediction and analysis method for multi-blade centrifugal fans, addressing the design contradiction between optimal fan functionality and minimal noise within limited design dimensions. The dynamic radial basis function method is introduced to investigate the geometric parameters of the scroll line, utilizing coherence analysis to identify the reasons for insufficient aerodynamic performance and noise reduction measures. Through the research, it is found that unreasonable design leads to a large turbulent vortex region within the blade passage and internal flow field, particularly involving circulation and backflow, which significantly reduces the fan's aerodynamic performance and operational efficiency. The design incorporates a composite scroll with a logarithmic spiral and circular arc integrated into one, and algorithm-based optimization of the scroll tongue, facilitating the transition of turbulence at the scroll outlet and the gap between the scroll tongue and impeller. Numerical results show an increase in airflow of 3.04 m3/min and a noise reduction of 3.79%. This indicates that the composite scroll design with a logarithmic spiral plays a dominant role in accelerating the aerodynamic performance of the scroll and reducing noise radiation.

Research of Performance Rapid Determination Method of the Forced Draught Blower in Power Plant

PERFORMANCE TEST AND OPERATING OPTIMIZATION OF FORCED DRAFT FANS IN POWER PLANTS

Performance Prediction of Water Powered Turbo Blower Based on Multi Field Coupling

Impact of Coal Types and Pulverizing Methods on the Thermal Performance of Blending Coal-Fired Boilers and Their Operational Optimization

Circulating Efficiency Test of Domestic 600MW Units and Their Performance Optimization Analysis

ANALYSIS ON THE PERFORMANCE OF COMPOSITE HEAT-ACCUMULATION AND POWER-GENERATION TECHNOLOGY IN THERMAL POWER PLANT

Numerical Investigation on the Effects of Gap Circulating Flow on Blower Performance under Design and Off-Design Conditions

Parameter determination of primary air fan for 1 025 t/h-class CFB boiler

A design method of volute profile of multi-blade centrifugal fan based on DRBF model

The Energy-Saving Retrofit of Axial Fan Based on Performances Test in a 300MW Unit

Investigation on the Performance of a Draught Fan on the Vehicle

Design and Calculation of Direct and Inverse Proposition of Axial Fan

Study on a New Method of Determining Boiler Soot-blowing Steam Flow Rate

Experimental Study on Peak-shaving Ability of a 330MW Thermal Power Unit in Heating State

Comparison of Three Calculating Procedures for Thermodynamic Parameters under Variable Operating Conditions of High-power Turbine

Study and Practice on Condition-Based Maintenance of Induced Fans in Coal-Fired Power Plants

A Power-Saving Control Strategy for Reducing the Total Pressure Applied by the Primary Air Fan of a Coal-Fired Power Plant

Numerical and experimental investigations on the performance of a 300 MW pulverized coal furnace

AN APPROACH TO THE TEST METHOD OF THERMODYNAMIC PERFORMANCE FOR GAS-STEAM COMBINED CYCLE POWER PLANT

Analysis of Transplanting Turbofan Engine Technology to Reducing Power Consumption Rate of Thermal Power Unit

Experimental Research of Power Turbine Test System