Abstract:Composites of poly(methyl methacrylate) (PMMA) with multi-walled carbon nanotubes (MWCNT) of varying aspect ratio and carboxylic acid functionality were prepared using melt mixing. The extent of dispersion and distribution of the MWCNTs in the PMMA matrix was investigated using a combination of high-resolution transmission electron microscopy (HRTEM), wide-angle X-ray diffraction (XRD) and Raman spectroscopy. The electrical resistivity and oscillatory shear rheological properties of the composites were measured as a function of MWCNT geometry, functionality, and concentration. The fundamental ballistic conductance of the pristine free-standing MWCNTs was investigated using a mechanically controlled break-junction method. The electrical conductivity of PMMA was enhanced by up to 11 orders of magnitude for MWCNT concentrations below 0.5wt.%. MWCNTs having higher aspect ratio, above 500, or functionalized with carboxylic acid groups readily formed rheological percolated networks with thresholds, determined from a power law relationship, of 1.52 and 2.06wt.%, respectively. The onset of pseudo-solid-like behaviour and network formation is observed as G′, η∗, and tanδ−1 are independent of frequency as MWCNT loading increased. Sufficiently long and/or functionalized tubes are required to physically bridge or provide interfacial interactions with PMMA to alter polymer chain dynamics. Carboxylic acid functionalization disrupts the crystalline order of MWCNTs due to a loss of π-conjugation and electron de-localisation of sp2 C–C bonds resulting in non-ballistic electron transport in these tubes, irrespective of how highly dispersed they are in the PMMA matrix.

Macroscopic Networks of Carbon Nanotubes in Pmma Matrix Induced by Ac Electric Field

Alignment of Carbon Nanotubes in Poly(methyl Methacrylate) Composites Induced by Electric Field.

Tensile Performance of Polymer Nanocomposites with Randomly Dispersed Carbon Nanothreads

Influence of AC Electric Field on Macroscopic Network of Carbon Nanotubes in Polystyrene

Effect of External Electric Field on the Microstructures and Properties of Carbon Nanotubes/thermosets Nanocomposites

Structures and Properties of Carbon Nanotubes/Thermosets Nanocomposites Subjected to External Electric Field During Cure Stage

Study on structures and properties of carbon nanotubes/thermosets nanocomposites subjected to external electric field during cure stage

Study on Poly(methyl Methacrylate)/carbon Nanotube Composites

Study On Electrical And Thermal Properties Of Pmma/Aligned Carbon Nanotubes Composites

Alignment Of Multiwalled Carbon Nanotubes In Bulk Epoxy Composites Via Electric Field

Effect of the selective localization of carbon nanotubes and phase domain in immiscible blends on tunable microwave dielectric properties

Influence of AC Electric Field on Dispersion of Carbon Nanotubes in Liquids

Preparation and properties of composites with staggered alignment of carbon nanotubes induced by electric field.

Uniform Patterned Synthesis of Vertically-Aligned Carbon Nanotubes on Low-Stress Micromechanical Structures

Electrical and rheological percolation of PMMA/MWCNT nanocomposites as a function of CNT geometry and functionality

Electrically conductive nanocomposites of PMMA and carbon nanotubes prepared by in situ polymerization under probe sonication

Mechanical Properties and Electrical Conductivity of Poly(methyl methacrylate)/Multi-walled Carbon Nanotubes Composites

Influences of multi-walled carbon nanotubes incorporated into

Electric Field Controlled Formation and Dissociation of Multiwalled Carbon Nanotube Conductive Pathways in A Polymer Melt

Electrostatic-Assembly of Carbon Nanotubes (CNTs) and Polymer Particles in Water: a Facile Approach to Improve the Dispersion of CNTs in Thermoplastics

Achieving Large Dielectric Property Improvement in Polymer/carbon Nanotube Composites by Engineering the Nanotube Surface Via Atom Transfer Radical Polymerization