Abstract:Journal of Reinforced Plastics and Composites, Ahead of Print. Carbon fibres play a crucial role in fibre-reinforced composite materials. Properties of these composites are not solely determined by the fibre and matrix. In contrast, the interface between fibre and matrix also plays a pivotal role. The presence of sufficient van der Waals and hydrogen bonds between carbon fibre and matrix is vital for achieving strong interfacial adhesion during the composite fabrication. However, due to the chemical inertness and hydrophobic nature of carbon fibre surfaces, establishing effective interfacial bonding with the matrix poses a challenge. To address this, a range of methods has been developed to modify the carbon fibre surface and facilitate the formation of functional groups. Combined methods, such as sized carbon fibre and ozone treatment, have gained widespread usage in overcoming these challenges. In this study, a detailed examination was conducted to compare differences between ozonation of desized and sized carbon fibres by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), Raman spectroscopy and scanning electron microscopy (SEM). XPS results distinctly demonstrated the transformation of epoxy groups into hydroxyl and carboxyl functional groups following the ozonation process. Notably, in the 60 min ozone treatment with 5 L/min (ozone-5), carboxyl groups increased from 1.27 to 8.12 %. In addition, in ozone-5 conditions, hydroxyl groups increased by 28.37 %. An escalation in graphite regions was also identified during the ozonation of the desized carbon fibre sample. Conversely, there was no significant alteration observed in the Raman value of sized carbon fibre samples. Furthermore, mechanical test results for both desized and sized carbon fibres after ozonation were compared. Ozone treatment of carbon fibres, regardless of whether sizing is present or not, leads to an increase in the interlaminar shear strength (ILSS). ILSS values for sized carbon fibres were initially 41 MPa. However, following ozone treatment, ILSS values of sized carbon fibres increased to 64 MPa. The tensile strength of sized carbon fibres increased from 772 to 831 MPa. This behaviour can be attributed to the increased amount of functional groups detected by XPS, Raman spectroscopy and the increase in roughness.

Effects of Fiber Surface Treatments on Mechanical Properties of T700 Carbon Fiber Reinforced BN–Si3N4 Composites

Research on Surface Treatment of Carbon Fiber and the Conductive Properties of Paper

Effects of carbon fibers modification on the properties of unsaturated polyester self-healing composites

Effect of Surface Treatment of Carbon Fiber on the Mechanical Properties of C-f/SiO2 Composite

Effect of Irradiation Grafting Epoxy on Surface Characteristics of Carbon Fibers and Mechanical Properties of Composites

Effect of fiber surface treatment with silane coupling agents and carbon nanotubes on mechanical properties of carbon fiber reinforced polyamide 6 composites

The effects of carbon fiber surface treatment by oxidation process for enhanced mechanical properties of carbon fiber/epoxy composites for biomedical application

CARBON FIBERS AND INTERFACIAL PROPERTIES OF THEIR REINFORCED RESIN MATRIX COMPOSITES

Effect of surface-treated carbon nanotubes on the mechanical and tribological performances of phenolic resin

Interfacial Improvement of Carbon Fiber/epoxy Composites Using a Simple Process for Depositing Commercially Functionalized Carbon Nanotubes on the Fibers

Specificity of the E-P state of the SR Ca-ATPase: implications for the coupling mechanism.

Multiscale interfacial enhancement of surface grown carbon nanotubes carbon fiber composites

STUDY ON THE MECHANICAL PROPERTIES OF CARBON FIBER REINFORCED CASTING NYLON

Surface Treatment of Carbon Fiber and Conductive Properties of Paper

The Effect of Surface Treatment Method to Heat Resistance of Aramid and Pre-oxidized Hybrid Fiber Reinforced Sealing Composite Material

Influence of surface modifications on interfacial and mechanical properties in fibre-reinforced composites

Surface modification of carbon fibers by anodic oxidation

Friction and Wear Behaviors of Surface-Modified Carbon Fabric/Epoxy Resin Composites

The mechanical properties of oxygen plasma-treated carbon nanotube and silicon dioxide-reinforced polytetrafluoroethylene composite film

Interfacial modification of carbon fiber by carbon nanotube gas-phase dispersion

The effect of electrophoretic deposition p‐aminobenzenesulfonamide grafted CNT on mechanical properties of carbon fiber filled polyamide 6 composite