Abstract:This paper first briefly reviews the modified effective length method in the literature for design of steel columns considering the inter-column interaction with the limitations outlined To overcome these. limitations, a new storey-buckling approach for steel frames is presented, where each storey is treated as a whole at the sway buckling, and its resistance is evaluated using the presented storey-buckling factor, which can be obtained from the defined storey slenderness using the relationships illustrated by the column curves in current codes. In total, 30 frame examples, considering the effects of storey number, the span number and the configuration of axial forces in columns, are adopted to examine the proposed method. Comparisons between FE results show that the presented method has good performances in predicting the failure load of considered frames. In FE analysis, the geometric and material nonlinearities as well as two types of geometric imperfections and longitudinal residual stresses are considered. Predictions from the notional load approach are also compared with FE results for some cases which, shows that these predictions may underestimate or overestimate the failure load of certain frames. The interaction between the sway buckling of the whole storey and the non-sway buckling of the weakest column may reduce the failure load of steel frames. In this Study, a reduction factor is presented to consider this mode interaction, and comparisons with FE results show that this method can reasonably assess the adverse effects of this mode interaction. (C) 2008 Elsevier Ltd. All rights reserved.

ODE Approach to Minimum‐weight Design of Pinned Columns in Buckling

Application Of Ode Techniques And Software To Determination Of Optimum Buckling Loads Of Clamped Columns

Column-to-column Interaction in Buckling of Frames

THE EQUIVALENT NEGATIVE FLEXURAL STIFFNESS OF AXIAL FORCES IN SWAY-PROHIBITED COLUMNS

Inelastic Storey-Buckling Factor of Steel Frames

BUCKLING OF TIMOSHENKO COLUMNS WITH LINEARLY VARIED RIGIDITIES AND AXIAL FORCES

Effect of Shear Deformation in Latticed Columns on Buckling of Heavily Loaded Industrial Portal Frames

STORY-BASED ELASTIC-PLASTIC STABILITY COEFFICIENTS OF FRAMES

Pre- and post-buckling analysis of structures by geometrically Nonlinear Force Method

Story-based Stability Design of Frames

Topology Optimization for Minimum Compliance with Material Volume and Buckling Constraints under Design-Dependent Loads

Numerical Investigation and Design of Thin-Walled Complex Section Steel Columns

Finite Strain Topology Optimization with Nonlinear Stability Constraints

Buckling Design Optimization of Complex Built-Up Structures with Shape and Size Variables

Exact Dynamic Stiffness Method for Non-Uniform Timoshenko Beam Vibrations and Bernoulli-Euler Column Buckling

Topology Optimization Design of Continuum Structures under Stress and Displacement Constraints

Static and dynamic interactive buckling of isotropic thin-walled closed columns with variable thickness

Adjoint-Based Design Optimization of Stability Constrained Systems

Bi-directional evolutionary structural optimization with buckling constraints

Topology optimization for minimum stress design with embedded movable holes

Analysis and Design Method on Local Buckling Behavior of 960 MPa High Strength Steel Columns under Axial Compression